Operation Manual

English - 66 -
Connecting to a Wireless Network (Optional)
IMPORTANT: “Veezy 100” USB dongle(sold separately) is required to use wireless network feature.
To use your TV with your wireless network, you need a “Veezy 100” Wireless USB dongle. To make your
modem’ s SSID visible, you should change your SSID settings via modem’s software. The TV cannot connect
to the networks with hidden SSID.
For connecting to a wireless LAN network, you should perform the following steps:
Connect broadband ISP connection ethernet cable to the ETHERNET INPUT of your modem.
Ensure that Nero Media Home software is installed to your PC. (for DLNA function).
Afterwards, you should connect wireless adaptor to one of the USB inputs of the TV.
To congure wireless settings please refer Network Settings section in Settings menu.
Broadband ISP
Connection
Wireless Lan
Adaptor
PC with Nero
Media Home
software installed
USB Inputs (Side of the TV)
A Wireless-N router (IEEE 802.11a/b/g/n) with simultaneous 2.4 and 5 GHz bands designed to increase
bandwidth. Optimized for smoother and faster HD video streaming, le transfers, and wireless gaming.
Use LAN connection for quicker le sharing between other devices like computers.
The frequency and channel differ depending on the area.
The transmission speed differs depending on the distance and number of obstructions between the
transmission products, the conguration of these products, the radio wave conditions, the line trafc, and
the products that you use. The transmission may also be cut off or get disconnected depending on the radio
wave conditions DECT phones, or any other WiFi 11b appliances. The standard values of the transmission
speed are the theoretical maximum values for the wireless standards. They are not the actual speeds of
data transmission.
The location where the transmission is most effective differs depending on the usage environment.
Wireless LAN adaptor should be connected directly to the TV’s USB port. USB hubs are not supported.
To congure wireless settings please refer wi section in Settings menu.
Wireless LAN adaptor supports 802.11 a,b,g & n type modems. It is highly recommended that you should
use IEEE 802.11n communication protocol in order to avoid any possible problems while watching videos.
Use the other usb input, if you experience problems with audio/video performance.
You must change your modem’s SSID when there are any other modems around with the same SSID. You
can encounter connection problems otherwise. Use wired connection instead if you experience problems
with wireless connection.