Product Manual

Rev. 5/23/2014 CPC, manual.doc

Page 7 of 11

(Continued from p. 6)

3. Always stand at arm’s length to the side of the material and properly grasp the clamp as shown in photo

7. If you must use two clamps to balance the load, grasp plate clamp #2. This is demonstrated in the,

“Properly grasp the second clamp” diagram below. Make sure that your clothing, feet, and the rest of your

body stay out from underneath the load. This stance allows the operator to exercise some control of the load

and optimizes safety.

4. The sheet must remain level during movement. Walk slowly to keep the load level. If the material has to be

removed from a container or be lifted over an obstacle, use a different device if you will not be able to

maintain the safe stance described in Rule 3.

If you use a motorized trolley:

 DO NOT push or pull the clamp or the load. Allow the trolley to provide all movement. Your hold on the

clamp is a means ONLY for stabilizing the load.

If you use a manual trolley:

 Properly grasp the clamp with one hand. DO NOT push or pull the sheet. Move the trolley with your hand that

grasps the clamp. Walk slowly to keep the load level.

Properly grasp the

clamp to stabilize

load

Diagram: Properly grasp the second clamp

Direction of Travel

Plate

Clamp #2

Plate Clamp #1

Chain adapter

with central islet

and safety hooks

at both ends