Manual

07/12/2012 revised 9/11/2012 ??-126-12?.doc
V
ESTIL MANUFACTURING CORP.
2999 N. Wayne St., Angola, IN 46703
Ph: 260-665-7586 · Fax: [phone]
E-mail: [e-mail] · Website: www.vestil.com
CONTAINER UNLOADING PLATFORM, MODEL CUP-3131
O
WNER
’
S
MANUAL
Serial number ____________
Assembly Instructions ………………………...……..……. 2
Use Instructions ………….................................................... 3
Inspections & Maintenance ….…………………..…………3
Label Placement Diagram……………………………….. 3
Warranty …………………………………….……..……. 4
! WARNING: Improper or careless use of this product might
result in serious personal injuries. Any person, who might assemble,
use or perform maintenance on this product should read the entire
manual and apply the following:
o All persons who will use or care for this product must be familiar with
this material. Failure to read and understand this owner’s manual
before using or servicing the CUP constitutes a misuse of the
product.
o DO NOT exceed the maximum load rating of 485 pounds (~220kg).
o DO NOT use the CUP without the handrail.
o Completely unload the CUP before working on it.
o ONLY use this product if all safety and warning labels are in place
(see “Label Placement Diagram” on p. 3) and readable.
o DO NOT use this product if any damage or unusual noise is observed.
o ONLY use the CUP on compacted, improved surfaces.
o DO NOT modify the CUP without express, written approval from the
manufacturer. Modifications might make the CUP unsafe to use.
Modifying the CUP without approval automatically voids the warranty.
o Only qualified maintenance personnel should maintain or repair this
product.
REPLACEMENT PARTS:
We proudly use quality parts to
make the items we manufacture.
To order parts for this
equipment, contact the factory at
the phone number listed above.
In any communication with the
factory please be prepared to
provide the serial number of the
cart, which appears on label
287 (see “Label Placement
Diagram”, p.3). Vestil is not
responsible for any problems
that result from using
unapproved replacement parts.
RECEIVING INSTRUCTIONS:
It is possible that this product
could be damaged during
delivery. Therefore, you should
remove the packaging upon
delivery to determine whether
the cart sustained damage
during transport; then inspect
the unit closely. If you find
damage or see evidence of
damage, or rough/careless
handling on either the
packaging or to the product,
immediately
record your
findings on the Bill Of Lading!
Also verify that the product
you received matches the
specifications as ordered.
C
OPYRIGHT 2012 VESTIL MFG. CO. 1