Full Product Manual

ManualsBrandsVestil ManualsBuilding materials10,000 lb. Capacity Hoisting Hook Double Swivel Latch

Table of Contents Rev. 3/20/2023 D MANUAL

D-SERIES HOPPERS

Receiving instructions

After delivery, remove the packaging from the product. Inspect the product closely to determine

whether it sustained damage during transport. If damage is discovered, record a complete description

of it on the bill of lading. If the product is undamaged, discard the packaging.

NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance

comply with laws, regulations, codes, and mandatory standards applied where the product is used.

Technical Service & Replacement Parts

For answers to questions not addressed in these instructions and to order replacement parts, labels,

and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department

can also be contacted online at https://www.vestil.com/page-parts-request.php.

Electronic Copies of Instruction Manuals

Additional copies of this instruction manual may be downloaded from

https://www.vestil.com/page-manuals.php.

Vestil Manufacturing Co.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

Website: www.vestil.com e-mail: info@vestil.com

Table of Contents

Page

Table of Figures

Page

Specifications……...………….…….….

2, 3, 4

D-25 exploded view & bill of materials…............................

Signal Words….…………………..….….

D-33 exploded view & bill of materials...............................

Safety Instructions……….………..……

D-50 exploded view & bill of materials………………......…

National Standards…………………….

D-75 exploded view & bill of materials……...............……..

Using the Hopper………..……………..

15 - 16

D-100 exploded view & bill of materials…..…………..…...

Record of Satisfactory Condition…...

D-150 exploded view & bill of materials…………….…..….

Inspections & Maintenance…………

D-200 exploded view & bill of materials……………..….…

Labeling Diagram………..............……

D-250 exploded view & bill of materials…………….……..

Limited Warranty…………..……..…….

D-300 exploded view & bill of materials……..................…

D-300-HD-NA, D-350-HD, D-400-HD, and D-500-HD

exploded view & bill of materials…………………..….....…

Summary of content (18 pages)

PAGE 1
Table of Contents Rev. 3/20/2023 D MANUAL Vestil Manufacturing Co. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 Website: www.vestil.com e-mail: info@vestil.com D-SERIES HOPPERS Receiving instructions After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport.
PAGE 2
Table of Contents Rev. 3/20/2023 D MANUAL SPECIFICATIONS Dimensions, net weight, and capacity figures are provided in the following tables. Light duty fabricated from 12 gauge steel Overall Dimensions (W x L x H) ¼ yd3 2,000 lb. 26” x 517/8” x 38” D-25-LD (0.19 m3) (909 kg) (66.0 x 131.8 x 96.5)cm 1/3 yd3 2,000 lb. 26” x 517/8” x 38” D-33-LD (0.25 m3) (909 kg) (66.0 x 131.8 x 96.5)cm ½ yd3 2,000 lb. 329/16” x 513/4” x 38” D-50-LD (0.38 m3) (909 kg) (85.6 x 131.4 x 96.5)cm ¾ yd3 2,000 lb.
PAGE 3
Table of Contents D-250-HD D-300-HD D-300-HD-NA D-350-HD D-400-HD D-500-HD Options Model LEKP D-DPLG-75 D-DPLG-2 LUG D-PIN D-TILT yd3 2½ (1.91 m3) 3 yd3 (2.29 m3) 3 yd3 (2.29 m3) 3½ yd3 (2.69 m3) 4 yd3 (3.08 m3) 5 yd3 (3.85 m3) Rev. 3/20/2023 6,000 lb. (2,727.3 kg) 6,000 lb. (2,727.3 kg) 6,000 lb. (2,727.3 kg) 6,000 lb. (2,727.3 kg) 6,000 lb. (2,727.3 kg) 6,000 lb. (2,727.3 kg) 699/16” 683/8” D MANUAL 513/4” x x (176.7 x 173.7 x 131.4)cm 813/4” x 685/8” x 5113/16” (207.6 x 174.3 x 131.
PAGE 4
Table of Contents Rev. 3/20/2023 D MANUAL Caster kits Model D-CK4-SC6-2 D-CK4-SC8-2 D-CK4-MR6-2 D-CK4-MR8-2 D-CK4-PU6-2 D-CK4-PU8-2 D-CK4-GFN6-2 D-CK4-GFN8-2 D-CK4-SC6-2HD Dimensions 6” x 2” (15¼ x 5.1)cm 8” x 2” (20.3 x 5.1)cm 6” x 2” (15¼ x 5.1)cm 8” x 2” (20.3 x 5.1)cm 6” x 2 (15¼ x 5.1)cm 8” x 2” (20.3 x 5.1)cm 6” x 2” (15¼ x 5.1)cm 8” x 2” (20.3 x 5.1)cm 6” x 2” (15¼ x 5.1)cm Uniform Capacity 4,800 lb. (2,182 kg) 4,800 lb. (2,182 kg) 2,400 lb. (1,091 kg) 2,400 lb. (1,091 kg) 4,800 lb.
PAGE 5
Table of Contents Rev. 3/20/2023 D MANUAL D-33 series hoppers exploded parts diagram & bill of materials D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) * Item Part no. 1 37-514-007 2 3 37-545-041 37-545-011 37-037-040 4 37-537-021 5 37-612-005 6 7 Description Qty. Item Part no.
PAGE 6
Table of Contents Rev. 3/20/2023 D MANUAL D-50 series hoppers exploded parts diagram & bill of materials D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) *37-514-044 RELEASE HANDLE AND CABLE REPLACEMENT KIT * Item Part no. Description Qty. 1 37-025-002 HANDLE, CHUTE RELEASE 1 2 37-145-001 SPECIALTY HARDWARE CABLE 1 SWAGE SLEEVE Ø1/8" X 5/8" 3 43383 1 LONG 4 43403 1/4" WIRE CLAMP 2 Item Part no.
PAGE 7
Table of Contents Rev. 3/20/2023 D MANUAL D-75 series hoppers exploded parts diagram & bill of materials D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) *37-514-044 RELEASE HANDLE AND CABLE REPLACEMENT KIT * Item Part no. Description Qty. 1 37-025-002 HANDLE, CHUTE RELEASE 1 SPECIALTY HARDWARE 2 37-145-001 1 CABLE SWAGE SLEEVE Ø1/8" X 3 43383 1 5/8" LONG 4 43403 1/4" WIRE CLAMP 2 Item Part no. Description Qty. Item Part no.
PAGE 8
Table of Contents Rev. 3/20/2023 D MANUAL D-100 series hoppers exploded parts diagram & bill of materials D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) *37-514-044 RELEASE HANDLE AND CABLE REPLACEMENT KIT * Item Part no. Description 1 37-025-002 HANDLE, CHUTE RELEASE SPECIALTY HARDWARE 2 37-145-001 CABLE SWAGE SLEEVE Ø1/8" X 5/8" 3 43383 LONG 4 43403 1/4" WIRE CLAMP Item 1 Part no. Qty. 1 1 1 2 Description Qty. Item Part no. Description Qty.
PAGE 9
Table of Contents Rev. 3/20/2023 D MANUAL D-150 series hoppers exploded parts diagram & bill of materials D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) *37-514-044 RELEASE HANDLE AND CABLE REPLACEMENT KIT * Item 1 2 3 4 Part no. Description Qty. HANDLE, CHUTE 1 RELEASE SPECIALTY 37-145-001 1 HARDWARE CABLE SWAGE SLEEVE Ø1/8" 43383 1 X 5/8" LONG 43403 1/4" WIRE CLAMP 2 37-025-002 Item Part no. Description Qty. Item Part no.
PAGE 10
Table of Contents Rev. 3/20/2023 D MANUAL D-200 series hoppers exploded parts diagram & bill of materials D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) *37-514-044 RELEASE HANDLE AND CABLE REPLACEMENT KIT * Item 1 2 Part no. 37-025002 37-145001 3 43383 4 43403 Description Qty. HANDLE, CHUTE 1 RELEASE SPECIALTY 1 HARDWARE CABLE SWAGE SLEEVE Ø1/8" 1 X 5/8" LONG 1/4" WIRE CLAMP 2 Item Part no. 1 37-514-004 Qty.
PAGE 11
Table of Contents Rev. 3/20/2023 D MANUAL D-250 series hoppers exploded parts diagram & bill of materials D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) *37-514-044 RELEASE HANDLE AND CABLE REPLACEMENT KIT Item Part no. 37-0251 002 37-1452 001 3 4 Description HANDLE, CHUTE RELEASE SPECIALTY HARDWARE CABLE SWAGE SLEEVE 43383 Ø1/8" X 5/8" LONG 43403 1/4" WIRE CLAMP Qty. 1 1 2 Item Part no. Description 1 37-514-004 Frame, weldment, base 2 37-545-016 Weldment, chute 3 * 1 Qty.
PAGE 12
Table of Contents Rev. 3/20/2023 D MANUAL D-300 series hoppers exploded parts diagram & bill of materials D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) *37-514-044 RELEASE HANDLE AND CABLE REPLACEMENT KIT Item Part no. Description Qty. HANDLE, 37-0251 CHUTE 1 002 RELEASE SPECIALTY 37-1452 HARDWARE 1 001 CABLE SWAGE 3 43383 SLEEVE Ø1/8" 1 X 5/8" LONG 1/4" WIRE 4 43403 2 CLAMP * Item Part no.
PAGE 13
Table of Contents Rev. 3/20/2023 D MANUAL D-300-HD-NA, D-350-HD, D-400-HD and exploded parts diagram & bill of materials D-500-HD series hoppers *37-514-044 RELEASE HANDLE AND CABLE REPLACEMENT KIT Item Part no. Description Qty. HANDLE, 37-0251 CHUTE 1 002 RELEASE SPECIALTY 37-1452 HARDWARE 1 001 CABLE SWAGE 3 43383 SLEEVE Ø1/8" 1 X 5/8" LONG 1/4" WIRE 4 43403 2 CLAMP * D-PIN TINE LOCK OPTION Hitch pin (45286) Tine lock pin (14-612-001) Item Part no.
PAGE 14
Table of Contents Rev. 3/20/2023 D MANUAL SIGNAL WORDS SIGNAL WORDS in this manual draw the reader’s attention to important safety-related messages. ! DANGER WARNING ! ! CAUTION NOTICE Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY. Use of this signal word is limited to the most extreme situations. Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS INJURY.
PAGE 15
Table of Contents Rev. 3/20/2023 D MANUAL NATIONAL STANDARDS US OSHA Rule 1910.178 (29 CFR 1910.178; the “Rule”) classifies this device as a “front- end attachment” whenever it is mounted on a lift truck. The Rule incorporates American National Standard ANSI/ITSDF B56.1 (the “Standard”). The Standard is published by the Industrial Truck Standards Development Foundation on its website (www.itsdf.org) where it is freely downloadable at http://www.itsdf.org/cue/b56-standards.html.
PAGE 16
Table of Contents Rev. 3/20/2023 D MANUAL Step 6: Return the chute to the latched position. Tilt the forklift mast toward the cab and back away from the dumpster. The hopper should automatically return to the latched position. Confirm that the chute is latched to the base by tilting the mast forward (away from the cab). The chute should not dump. If the chute will not latch by tilting the mast backwards, set the hopper on the ground and manually latch the chute to the frame.
PAGE 17
Table of Contents Rev. 3/20/2023 D MANUAL LABELING DIAGRAM The unit should be labeled as shown in the diagram. Label content and location are subject to change so your product might not be labeled exactly as shown. Compare this diagram to your Record of Satisfactory Condition. Replace all labels that are damaged, missing, or not easily readable (e.g. faded). Order replacement labels by contacting the Replacement Parts Department online at http://www.vestilmfg.com/parts_info.htm.
PAGE 18
Table of Contents Rev. 3/20/2023 D MANUAL LIMITED WARRANTY Vestil Manufacturing Company (“Vestil”) warrants this product to be free of defects in material and workmanship during the warranty period. Our warranty obligation is to provide a replacement for a defective, original part covered by the warranty after we receive a proper request from the Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service.