Use and Care Manual

ManualsBrandsVestil ManualsBuilding materials1 cu. yd. Light Duty Self-Dumping Hopper

Table of Contents Rev. 3/10/2020 H-hoppers MANUAL

H-SERIES HOPPERS

Instruction Manual

Receiving Instructions

After delivery, remove the packaging from the product. Inspect the product closely to determine whether

it sustained damage during transport. If damage is discovered, record a complete description of it on the

bill of lading. If the product is undamaged, discard the packaging.

NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance

comply with laws, regulations, codes, and mandatory standards applied where the product is used.

Technical Service & Replacement Parts

For answers to questions not addressed in these instructions and to order replacement parts, labels,

and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can

also be contacted online at http://www.vestilmfg.com/parts_info.htm

Electronic copies of Instruction Manuals

Additional copies of this instruction manual may be downloaded from

https://www.vestil.com/page-

manuals.php.

Table of Contents Table of Figures

Specifications……………….…...… 2 Exploded view & bill of materials: H-25 series hoppers…………... 4

Signal Words….………..………….. 3 Exploded view & bill of materials: H-50 series hoppers…………... 5

Hazards………………...……….….. 3 Exploded view & bill of materials: H-100 series hoppers………….. 6

Loading the Chute…..….….……… 9 Exploded view & bill of materials: H-150 series hoppers…………. 7

Using the Hopper…………………. 9 Exploded view & bill of materials: H-200-HD……………………….. 8

Stacking hoppers……………….…. 10 Labeling Diagram………………………………………………………11

Inspections & Maintenance………. 10

Limited Warranty………………..…. 12

Vestil Manufacturing Corp.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

Web: www.vestilmfg.com e-mail: info@vestil.com

Summary of content (12 pages)

PAGE 1
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL Vestil Manufacturing Corp. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 Web: www.vestilmfg.com e-mail: info@vestil.com H-SERIES HOPPERS Instruction Manual Receiving Instructions After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport.
PAGE 2
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL SPECIFICATIONS Thank you for purchasing an H-series, self-dumping hopper made by Vestil Manufacturing Co. (“Vestil”). Our hoppers are durable, high-quality products that provide many safety-enhancing features.
PAGE 3
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL SIGNAL WORDS This manual uses SIGNAL WORDS to draw attention to uses of the product that could result in personal injuries, as well as the probable seriousness of those injuries. Other signal words call attention to uses likely to cause property damage. Signal words used in this manual appear below along with the definition of each word. Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY.
PAGE 4
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL H-25 SERIES HOPPERS EXPLODED VIEW AND BILL OF MATERIALS Axle pin receiver Item Finger tab Latch lever Lock toggle Part no.
PAGE 5
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL H-50 SERIES HOPPERS EXPLODED VIEW AND BILL OF MATERIALS Axle pin receiver Item no. 1 2 3 4 5 6 7 8 Finger tab Latch lever 9 Lock toggle 11 10 11 12 13 Part no.
PAGE 6
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL H-100-SERIES HOPPERS EXPLODED VIEW AND BILL OF MATERIALS Axle pin receiver Item no. 1 2 3 4 5 6 7 8 Finger tab Latch lever 9 Lock toggle 11 10 11 12 13 Part no.
PAGE 7
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL H-150-SERIES HOPPERS EXPLODED VIEW AND BILL OF MATERIALS Axle pin receiver Item no. Finger tab Latch lever Lock toggle 11 Part no.
PAGE 8
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL H-200-HD EXPLODED VIEW AND BILL OF MATERIALS Axle pin receiver Item no. Finger tab Latch lever Lock toggle 4 Part no.
PAGE 9
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL LOADING THE CHUTE Verify that the hopper chute is securely latched and locked to the base frame before filling it with refuse. Standard H-series self-dumping hoppers are suitable for use indoors and outdoors and in most industrial and commercial settings. They are designed for use with rider forklift trucks. Use the hopper to collect and dump nonhazardous wastes. USING THE HOPPER These hoppers have a low profile and rotate through a 90° dump angle.
PAGE 10
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL STACKING HOPPERS H-series hoppers are designed to stack on top of each other. Notches in the base and rim grooves in specially designed cast feet of one hopper engage the rim of the hopper supporting it as shown in the diagram to the right. Hoppers of identical width can be stacked together, i.e. H-25 and H-50 series hoppers stack together. H-100 and H-150 series hoppers also stack together.
PAGE 11
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL LABELING DIAGRAM The unit should be labeled as shown in the diagram. However, label content and location are subject to change so your product might not be labeled exactly as shown. Thoroughly photograph the unit when you first receive it as discussed in the Record of Satisfactory Condition section on p. 9. Make sure that your record includes a photograph of each label.
PAGE 12
Table of Contents Rev. 3/10/2020 H-hoppers MANUAL LIMITED WARRANTY Vestil Manufacturing Corporation (“Vestil”) warrants this product to be free of defects in material and workmanship during the warranty period. Our warranty obligation is to provide a replacement for a defective, original part covered by the warranty after we receive a proper request from the Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service.