Specification Sheet

QUOTE #
FILE NAME:
SALES:
W.O.#
P.O.#
REFERENCE:
DATE:
DRAWN BY:
DISTRIBUTOR'S NAME:
QUOTED LEAD TIME :
SCALE: 1:12
08-007-148
Signed:____________________________Date:_________
Printed Name:__________________________________
I, THE UNDERSIGNED, AGREE THAT THE PRODUCT AS
REPRESENTED SATISFIES DESIGN AND DIMENSION
REQUIREMENTS. I ALSO ACKNOWLEDGE MY DUTY TO
CONFIRM PRODUCT AND INSTALLATION
COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE
AND LOCAL REGULATIONS AND STANDARDS.
A
P
P
R
O
V
A
L
[ ] As drawn [ ] As marked
ANY MODIFIED UNITS ARE NON-RETURNABLE
LEAD TIME WILL START UPON RECEIPT OF SIGNED APPROVAL DRAWING
POWER
FAB.
ENG.
SALES
FOR INTERNAL USE ONLY
PROJECT SIGN OFF
11/16"
.77
19.91
* OSHA REQUIRES ALL FORK LIFT ATTACHMENTS TO BE APPROVED
BY THE FORK TRUCK MANUFACTURER. RELABELING OF FORK
TRUCK MAY BE REQUIRED DUE TO CHANGES IN LOAD CENTERS.
IT IS THE RESPONSIBILITY OF THE CUSTOMER TO GET
PERMISSION FROM THE FORK TRUCK MANUFACTURER FOR USE
ON THEIR SPECIFIC FORK TRUCKS.
40"
18"
32 3/8"
36"
30 11/16"
1 1/32"
24"
15"
19.91
19/32"
4-PLACES
11/16"
6"
STANDARD FEATURES
MODEL NUMBER: HOOK-BASE-32
CAPACITY: 4,000 LBS
OVERALL HEIGHT: 6"
OVERALL WIDTH:
30 11/16"
OVERALL LENGTH:
40"
ACCOMMODATES UP TO A 5" WIDE x 2" THICK FORK
MINIMUM FORK LENGTH 36"
PIN STYLE TINE LOCK
EFFECTIVE THICKNESS IS LESS THAN 1"
LOST LOAD = 87.86 LBS.
TOUGH BAKED IN POWDER COATED BLUE FINISH
SPECIAL FEATURES
NONE
NEVER EXCEED LOAD CENTER RATING PER
FORK TRUCK MANUFACTURER'S GUIDELINES.
DO NOT USE THIS FORK TRUCK ATTACHMENT
IF LOAD WILL EXCEED FORK TRUCK
MANUFACTURER'S LOAD CENTER RATING.
CENTER OF
GRAVITY
FORK MOUNTED BASE - HOOK-BASE-32
*** ANY ADDITIONS, DELETIONS, OR OMISSIONS MUST BE CORRECTED ON THIS DRAWING AS THIS DRAWING WILL BE CONSIDERED ALL INCLUSIVE ***
ALL GRAPHICS PROVIDED ARE FOR REFERENCE ONLY. IF CERTAIN DIMENSIONS ARE CRITICAL PLEASE VERIFY THOSE DIMENSIONS WITH YOUR SALESPERSON
APPROX WEIGHT: 87.86 lbs.
DOES NOT INCLUDE WEIGHT OF POWER OR PACKAGING!!!
05/07/2013
VESTIL MANUFACTURING
X
X
X
X
X
X
CA
DIMENSION TOLERANCE ± 1/4"