Use and Care Manual

01/11 rev. 7/29/2014 LM-boom, manual
Copyright 2013 Vestil Manufacturing Corp.
LM-Series and LMS-Series Fork Truck Attachments
Use and Maintenance Manual
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product
is used is exclusively the responsibility of the owner/end-user. Before using the boom for the first time, the end-
user/owner should perform an “Initial Inspection”. (See “Initial Inspection,” p. 27).
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either:
a) Instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil responsible
for any consequential damages sustained as a result of failing to exercise sound judgment while assembling,
installing, using or maintaining this product.
Table of Contents Table of Figures
Product Specifications…………. 2 Fig. 1: LM-1T & -1NT Exploded Parts Diagrams, Parts Lists, Center of Gravity………… 4 - 7
Hazard identification……………. 3 Fig. 2: LM-OBT & -OBNT Exploded Parts Diagrams, Parts Lists, Center of Gravity........ 8 - 11
Safety Recommendations……… 3 Fig. 3: LM-HRT & -HRNT Exploded Parts Diagram, Parts Lists, Center of Gravity…….. 12 - 15
Operation Instructions………….. 24 - 26 Fig. 4: LM-EBT & -EBNT Exploded Parts Diagram, Parts Lists, Center of Gravity……... 16 - 19
Inspections & Maintenance……. 27 - 28 Fig. 5: LMS-EBT & -EBNT-46-(4k, 6k, & 8k), Parts Lists, Centers of Gravity……..…….. 20 - 23
Label placement diagram……… 29 Fig. 6 Step 1 - Securely connect boom to fork truck...……………………………………… 24
Limited Warranty……………….. 30 Fig. 7 Step 3 - Manual adjust degree of boom extension….………………………………. 24
Fig. 8 [OBT Models] Step 4 - Boom Angle Adjustment…………………………………….. 25
LM-HRT &
LM-HRNT
LM-EBT &
LM-EBNT
LM-1T &
LM-1NT
LM-OBT &
LM-OBNT
VESTIL MANUFACTURING CORP.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: [phone] -or- Toll Free [phone]
Fax: [phone]
www.vestilmfg.com e-mail: [e-mail]
LMS-EBT &
LMS-EBNT