Product Manual

Rev. 9/10/2014 LPC, manual.doc

Page 10 of 12

Step 5: Perform a periodic inspection, as recommended in ASME B30.20.

Step 6: Make a dated record of the repairs, adjustments and/or replacements made.

Label placement diagram:

Only use the clamp if ALL labels are in place as shown below, readable and undamaged. Contact Vestil to order

replacement labels when necessary.

Label 675 (applied to back of tag 023):

hazards of improper use

Tag 023 (connected to ring via cable tie):

rated load information & BTH service class

LPC data tag