User Manual

07/19/11 Rev. 3/7/2017 S-FORK-4-AT, MANUAL
Copyright 2017 Vestil Manufacturing Corp Page 1 of 7
.
S-FORK-4-AT HOIST HOOK FORK TRUCK ATTACHMENT
INSTRUCTION MANUAL
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of
lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, installation, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Table of Contents
Product Introduction …………………….. ……………………………………………………………………………………………. 2
Signal Words …………………………………………………………………………………………………………………………… 2
Safe Use Recommendations …………………………………………………………………………………………………………. 2
FIG. 1: S-FORK-4-AT Exploded Parts Diagram……………….……………………………………………………………………. 3
Use Instructions………………………….. ……………………………………………………………………………………………. 4
Inspections & Maintenance……………................................................................................................................................... 5
Labeling diagram.................................................................................................................................................................... 6
Limited Warranty…………………………. ……………………………………………………………………………………………. 7
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com
e
mail:
info
@vestil.com

Summary of content (7 pages)