Instructions / Assembly

ManualsBrandsVestil ManualsFencing2 ft. x 4 ft. Powder Coat Yellow Steel Safety Railing Self Closing Fence Gate

Rev.9/29/2017 SPG,MANUAL





Vestil Manufacturing Corp.

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703

Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868

Fax: (260) 665-1339

Web: www.vestilmfg.com e-mail: info@vestil.com



SPG‐SeriesSelf‐ClosingGuardrailGates

AssemblyandInstallationManual



eceivinginstructions

:



After delivery, remove the packaging from the product. Inspect the product closely to determine

whether it sustained damage during transport. If damage is discovered, immediately record a complete

descriptionofthedamageonthebilloflading.Iftheproductisundamaged,discardthepackaging.



Note:

Theend‐userissolelyresponsibleforconfirmingthatproductdesigncomplieswithalllaws,regulations,

codes,andmandatorystandardsappliedwheretheproductisused.

TableofContents



Assembly&Installation……………………………………………………………………………………………………………………………….2–3

SPG‐26ExplodedPartsDiagramandBillofMaterials………………………………………………………………………………………. 4

SPG‐40ExplodedPartsDiagramandBillofMaterials………………………………………………………………………………………. 5

LimitedWarranty…………………………………………………………………………………………………………………………………………….. 6

Summary of content (6 pages)

PAGE 1
Rev. 9/29/2017 SPG, MANUAL Vestil Manufacturing Corp. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 Web: www.vestilmfg.com e-mail: info@vestil.com SPG‐Series Self‐Closing Guardrail Gates Assembly and Installation Manual Receiving instructions: After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport.
PAGE 2
Rev. 9/29/2017 SPG, MANUAL Assembly & Installation Front view of gate assembly B: shoulder bolt FIG. 2 U‐bolt (5/16in.‐18 x 2in. inner diameter) 7 /16in. flat washer A: Mounting bracket C: 1/2in. ‐13 hex nut 5 /16in.‐18 hex nut FIG. 1 1 1 /2in. ‐13 x 1 /4in. bolt 5 /16in.‐18 hex nut 5 /16in.‐18 x 1in. bolts E: Gate frame 1 /2in. flat washer 1 /2in. ‐ 13 hex nuts D: Gate subassembly Midrail Guardrail F: Gate attachment bracket Rear view of gate assembly FIG. 2 5 /16in.
PAGE 3
Rev. 9/29/2017 SPG, MANUAL Follow the steps outlined below to assemble your SPG‐series gate. Letters in parentheses () correspond to parts identified in the diagrams on p. 1. 1) Attach mounting brackets to the guardrail. a. Position both of the mounting brackets (A) so that the bottom bolt hole is just above the midrail; then b. Insert a 1/2in. ‐13 x 3in. shoulder bolt (B) through the top bolt hole in the brackets; c.
PAGE 4
Rev. 9/29/2017 SPG, MANUAL SPG‐26 exploded parts diagram: Model Finish Item no. 1 1.1 1.2 1.3 1.3.1 1.3.2 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 2 2.1 2.2 2.3 2.4 2.5 Part no. 23‐514‐118 23‐014‐178 23‐016‐114 23‐516‐010 23‐016‐134 23‐016‐135 23‐146‐003 36109 21521 33009 23‐112‐014 65078 36103 11055 36104 42030 23‐514‐120 23‐014‐189 11207 36109 33011 26358 Height Net weight SPG‐ 26‐Y Yellow powder coat 16in. to 26in. 12in. 30 lb. SPG‐ 26‐G Galvanized 16in. to 26in. 12in. 30 lb.
PAGE 5
Rev. 9/29/2017 SPG, MANUAL SPG‐40 exploded parts diagram: Model Finish Item no. 1 1.1 1.2 1.2.1 1.2.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 2 2.1 2.2 2.3 2.4 2.5 Part no. 23‐514‐119 23‐014‐178 23‐516‐010 23‐016‐134 23‐016‐135 23‐146‐003 36109 21521 33009 23‐112‐014 65078 36103 23‐014‐179 23‐016‐133 11055 36104 42030 23‐514‐120 23‐014‐189 11207 36109 33011 26358 Height Net weight SPG‐ 40‐Y Yellow powder coat 24in. to 40in. 12in. 35 lb. SPG‐ 40‐G Galvanized 24in. to 40in. 12in.
PAGE 6
Rev. 9/29/2017 SPG, MANUAL LIMITED WARRANTY Vestil Manufacturing Corporation (“Vestil”) warrants this product to be free of defects in material and workmanship during the warranty period. Our warranty obligation is to provide a replacement for a defective original part if the part is covered by the warranty, after we receive a proper request from the warrantee (you) for warranty service. Who may request service? Only a warrantee may request service.