Product Manual

10
SWA MAST ASSEMBLY DIAGRAM
2.) RUBBER HANDLE GRIP
3.) PLASTIC HANDLE INSERT
4 & 5.) *TOP STRETCH WRAP RETAINER W/BALL
BEARING & SNAP RING
8.) SHAFT
9.) *BOTTOM STRETCH WRAP RETAINER (SOLID)
39.) 3" dia. FIBER WASHER
10.) BOLT, 3/8"-16 x 1" (HHCS) w/ LOCK WASHER
*TOP AND BOTTOM STRETCH WRAP RETAINERS
MUST BE IN PROPER POSITIONING FOR HANDLE
TO PUT TENSION ON FILM
*DO NOT SWITCH TOP AND BOTTOM STRETCH
WRAP RETAINERS!! *
3
4, 5
8
9
10
39
10
• A 15" & 25" Film Rod (along w/ Handle, (2) Plastic Retainers, Bearing, & Fiber Washer) go out
with every purchase unless specified.
• The 15" Rod Holds 10"H Material
• The 25" Rod Holds 20"H Material
• Optional 23" Rod Holds 18"H Material
• Optional 45" Rod Holds 40"H Material
• Optional 65" Rod Holds 60"H Material
For any rod over 25", it will be very difficult to move the mast up and down due to the counterbal-
ance weight being less than the weight of the wrap. The operator will have to lift the wrap with no
appreciable assistance from the counterbalance.
OPTIONAL FILM RODS
MODEL NO.
SWA-ROD-45
SWA-ROD-65
SWA-ROD-COMBO
DESCRIPTION
45"H Film Rod
65"H Film Rod
45"H & 65"H Film Rod
WEIGHT
11 lbs.
13 lbs.
24 lbs.