Product Manual

ELECTRICAL DIAGRAM SWA-48, SWA-54 and SWA-60 with PMO

Static electricity is produced while stretch-wrapping a

pallet. This effect can intensify in dry air conditions.

• To help to minimize the effects of generated static on

personnel and the machine's control, the control should

always to grounded to the machine frame

• If undesirable effects of static are experienced, it is

recommended that the frame be bonded to a driven

ground rod. (See the NEC for details regarding installation

of driven ground electrodes.)

• This drawing depicts the typical potentiometer settings

for the various control parameters of the controller.

• Refer to the supplied owner's manual for maintenance,

adjustment, and trouble-shooting instructions.

NOTE:

ALL COMPONENTS ARE REPRESENTED AS THEY WOULD BE WITH THE

CARRIAGE IN ITS "HOME", OR RESTING, POSITION. HOME POSITION IS

DEFINED TO BE VIEW THE CARRIAGE IS FULLY LOWERED AND ALL

POWER IS OFF.

(Powered Mast Diagram)