Unit installation

V100 PRIMARY FUNCTIONS

UPPER SCREEN MODES

SPD displays the current Speed and is updated

continuously. DST displays current Trip Distance.

Automatically resets after the maximum trip

distance (999.9) is achieved. Trip Distance is

displayed in the SPD/DST screen mode and

starts automatically when the wheel rotates and

TT timer is active. Reset DST to zero by

pressing Button #3 for 2 seconds with the

timers turned off in any screen mode except

STP/IDS.

SPD

DST

SPEED

TRIP DISTANCE

RIDE TIME

TOTAL TIME

Ride Time and Total Time are shown

simul-taneously. Ride Time (RT) measures actual

riding time and starts automatically when the

timers are set to "0:00:00" and the wheel rotates.

If not, TT timer must be active for RT timer to

operate. Total Time (TT) shows the total elapsed

trip time from start to finish. Like RT, TT starts

automatically when the wheel rotates ONLY

when the timers are set to "0:00:00", or it can be

started manually by pressing Button #3 in the

RT/TT screen mode ONLY. TT can only be

stopped manually by momentarily pressing

Button #3 in RT/TT screen mode at the end of a

ride. To reset both RT and TT to zero, turn timers

off and press Button #3 for at least 2 seconds.