Technical data

25
4 Running-in
In order to ensure a long life for your en-
gine, please observe the following for the
first 50 operating hours:
• Allow the engine to reach operating tem-
perature before applying a load.
• Avoid fast acceleration.
• Do not allow the engine to run faster
than 3/4 of maximum RPM.
After the rst 50 operation hours carry out the
following maintenance:
• Drain water from fuel lter, see page 44.
• Engine oil change, see page 47.
• Replace oil lter, see page 48.
• Replace fuel lter, see page 55.
• Change gearbox oil (Technodrive), see
page 58.
• Change gearbox oil (ZF Hurth), see page 59.
• Check V-belt, see page 62.
• Check exible engine mounts, see page 63.
• Check engine for leaks, see page 63.
• Check tightness of all fasteners, bolts and
nuts, see page 63.