Technical data

78
7 Winter storage procedure
1 Corrosion protection
The various parts of the engine (except the
engine block) have been treated with an
anti-corrosion protective medium. In order
to prevent corrosion, the engine should be
rinsed o to remove any salt residues. If there
is any corrosion, the paint should be touched
up. Engine parts that become hot must be
touched up with heat-resistant paint.
2 Fuel system
• Drain the water from the water separator/
fuel lter and the fuel tank.
Ensure that the tank is completely lled with
fuel.
• Install a new fuel lter. (page 55).
VD00803 VD00133