NEED HELP? CON Have product questions? Need technical support? Please feel free to contact us: 6 n
‘Thank you for purchasing our products, To ensure that you can fully understand and Install this product, please read the manual carefully. After reading, please keep It for future reference. Shell: SUS 201; Shelf: Aluminum; Storage Bex: Aluminum Foil. Install the mounting feet. Take out the four feet from the accessory box, fix them to the nut holes at the four comers of the bottom with a wrench, and tighten them (as shown in the right figure 2 Install the handle.
.Connect the power cord, and tum on the power switch, The device starts running after the red light Is on. 5. Temperature Regulation and Switching Temperature Measurement Range: 100-170 degrees Fahrenheit (the default value is 122 degrees). Any value can be set within the range of 100-170 degrees, You can choose to preheat the box for about 20 minutes and then put in the food to be heated.
Clean and maintain the device in a normal way. If the device is not used for a long time, please turn off the power switch and unplug the power plug. Wipe It with a dry cloth or a sightly wet cloth after dally cleaning. Please keep the product dry to prevent high temperature bums during use.