SERVICE CONDITIONS 1. Environmental overage emperaturetd0C~15TC 2. Altitude:the installation pace for voltage regulator should not be more than 1000m. 3. Afr relative humidity the average humidity for the wettest month 1590% the average temperature 925°C 4 Cu rent and voltage wave:power voltage way closes to sine. 5+ Without the gays smoke, chemical aggravation, ditsy defilement explosiveness corrosive matadors which can seriously effect the insulation collage regulator in the installation field, : 5.
SPECIFICATION FOR REGULATOR Rae output capacity Input voltage | Pulverization I Max sputum Type (KYA) Phase No. ov) (Vv) comet) 0.2 1 220 0-250 0.84 0.5 1 220 0-250 2 i 1 220 0250 4 2 1 220 04250 8 3 1 220 0-250 12 5 1 220 0-250 20 19 1 220 0-250 40 15 1 220 0-250 60 26 1 220 0-250 88 2 2 380 0430 0.6 3 3 380 0-430 4 ACTS-670.
Principle and Structure I. Basic principle: Regulator is self coupling transformer that circle ratio can be adjustable continually Main axes aot with brushstroke when republicanism recur to hand-while The circle ratio can be changed continual when slide with grind surface of coil se that output-voltsge aide! from zeta-to max smoothly 2a Main structure: Cell structure single-phase. 2K VA= 10K VA regulator is regulate voltage coll cons tr: suction.
Contact Voltage regulator Certification Product Type: Rating Power: Condition Temperature: <40°C Humidity: 5% Fully Loaded Current: Empty Loaded Current: Working Hours: 8 hours Withstand Voltage: 2KV Minute Insulated Resistance > 10M @ There is not spark phenomenon between the contact surfaces of copper wire whit running carbon brush. This product is through the test and qualifies to leave factory.