Customer Support Team Mon-Fri 9:00 am 5:00 pm Tel: 609-755-4452 Mail: [w] 3%: [sm] =] 21907.05135 FACTORY Water flow system ice machine The exterior of the machine will be continuously adjusted for production optimization. The exterior used in this manual is for reference only.
Uncatalogued Receiving and Checking. seen sad Foot Installation & Placement viv Electrical safety Installation of Water SUPPLY. wen han 3 All-in-one Machine Installation Diagram a Split Machine Installation Diagram. ovo vv oo 5 Ice Machine Work Steps ass e010 + 6 SK/SH Control Panel Operating Manual. Control Panel Operating Manual a. 8 DZ Control Panel Operating Manual. 14 Routine Cautions aaa 16 Fault Self-diagnosis Maintenance eer ree eee ne 17 P7@ Water Tank Clean Submersible Pump Clean sea ae AA.
Foot Installation & Placement Screw the feet of the ice machine to the base plate. Each foot must be screwed up and tightened so as not to bend. Put the ice machine in a sturdy and flat position. Adjust the height of the foot to make the ice machine level. . The ice machine is not suitable to be used in the outdoors. The normal using ambient temperature is between 18~33 degree centigrade, and the water temperature is between 5-30 degree centigrade.
All-in-one Machine Installation Diagram This diagram is used for water connection of air-cooled machines. Tap Water: 1/2" external thread joint .
Ice Machine Steps The working steps of the ice machine are divided into three parts : 1. The automatic cleaning of the ice machine (once, 2 minutes ) When each ice machine starts, the automatic 2 minutes cleaning program is automatically carried out to clean the floating objects in the evaporator and the tank. In 2 minutes the tank uninterrupted water, pump run.
SA Control Panel Operating Manual General description: This is a fully automatic ice making machine, all programs of the SA control panel have been set up in the factory. Usually, the user just need to do some simple operation. Please place the machine in the appropriate location and connect to power supplies. IF you machine has red switch on the machine's back or left side, Please turn on it. Then the SA control panel will light up, the machine will run automatically, the user need no any other operation.
11. SA Control Panel Operating Manual Manual clean: Clean icon flashes. Displays time is cleaning time. (Tt will not display icon, iF the program has no cleaning function.. Ice freezing: Breezing, Comp. and regarding icons light up. Display time 1s ice freezing time. After entering the countdown program, it displays remaining time for ice making. In the status of delayed shutting down, Freezing icon flashes.
SA Control Panel Operating Manual III. Several gently-used procedures settee Please operate as the following steps when you need. ur reference B. How to adjust the thickness of the ice? (Eee) (sm) -belle [Ee (6a) 5 pis Ex BE = 1, When the is on making ice model. Press the discretionary one of the five buttons to unlocked. 2. Press Schedule/+ button, the position which displays temperature will flash “80” . 3. Press Schedule/+ button and Light/button to adjust.
Control Panel Operating Manual Dz CDE ® EOE Freeze Harvest Bin foll Clean Fault sates ee ee Tee ip tun Yim 9 CHD J 9 -power-on delay water intake Situation Display. Power-on Delay: After water intake finish, displays Standby time. Clean display When ice harvest, press clean button display: Clean light flashes, enter into cleaning. Fault: light flashes, corresponding fault item Lights ON. = BE Freeze: displays ice freezing time, after freeze lp) finis, began to harvest, it will dis la &® 30s countdown.
~ ~ Routine Cautions When transportation and mobile location, the ice machine tilt shall not exceed 45 degrees. . Ice machine, please use independent water source, and check regularly to prevent water pressure 1s too low, fluctuations or filter clogging. Do not store any sundries in the ice storage bin, or freeze any ford in the ice storage bin and keep the ice shovel clean.
P7¢ Water Tank Clean If there is impurity scale in the water tank, the ice machine will deposit scale inside after a period of time, which will affect the color, quality and taste of ice. If not handled in time, the machine will not work properly.
Fault Detection Fault Possible Cause Solution Poor contact of socket. Replace the socket. Tce machine Remove the ice, the machine will dos. at Ice storage bin is full of ice. run automatically. The cover of evaporator does not reset.| Adjust the cover to make it reset free. The water supply has not been Ice machine | oer cone Hilt opened | check the water supply. shuts down [Toe chipped dA be placed 3 ; after | horizontal F Adjust the Feet to be horizontal.
