Technical Support and E-Warranty Certificate www.vevor.com/support METAL EDGING USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
METAL EDGING Model:JC40*6in 3pcs, JC40*8in 3pcs, JC40*6in 4pcs, JC40*8in 4pcs, JC40*6in 6pcs, JC40*8in 6pcs, JC12*40in 4pcs NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
Safety & Warning Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury or damage to valuable property. Wear ANSI-approved safety goggles, heavy-duty work gloves and safety shoes during assembly and installation of this product. Keep bystanders out of the area during assembly Do not assemble when tired or when under the influence of alcohol, drugs or medication.
SPECIFICATIONS Model JC40*6in 3pcs Size of Single metal edge 40*6in Color Black Model JC40*8in 3pcs Size of Single metal edge 40*8in Color Black Model JC40*6in 4pcs Size of Single metal edge 40*6in Color Black Model JC40*8in 4pcs Size of Single metal edge 40*6in Color Black Model JC40*6in 6pcs Size of Single metal edge 40*6in Color Black Model JC40*8in 6pcs Size of Single metal edge 40*8in Color Black Model JC12*40in 4pcs Size of Single metal edge 40*12in Color Black
COMPONENTS Model Metal edge Connector JC40*6 in 3pcs x3 x5 JC40*8in 3pcs x3 x5 JC40*6in 4pcs x4 x6 JC40*8in 4pcs x4 x6 JC40*6in 6pcs x6 x8 JC40*8in 6pcs x6 x8 JC12*40in 4pcs x4 x6 Gloves X1 Required tools 1.Spade 2.Hammer and a block of wood Assemble instructions STEP 1 Prepare a line for the edging to follow and remove any obstructions. If ground is stony,loosen with pickaxe.
STEP 2 Bending instructions: A work bench, the edge of a table, a timber, or other former is advised when bending the metal edge to required angle. NOTE: Do not cut with anything as it can cause injury. STEP:3 Insert the connected metal edges into the ground and secure it with a hammer. NOTE:Place a piece of wood over the metal edge when striking with a hammer to avoid damaging the metal edge. STEP:4 Insert a connector to fix the connection.
Supplementary statement:The metal barrier can be bent into the shape you need according to your needs (Including but not limited to the following shapes). ① ② ③ Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd.
Technical Support and E-Warranty Certificate www.vevor.
Técnico Soporte y certificado de garantía electrónica www.vevor.com/support BORDE METÁLICO MANUAL DE USUARIO We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
METAL EDGING Modelo: JC40*6 pulgadas 3 piezas , JC40* 8 pulgadas 3 piezas , JC40* 6 pulgadas 4 piezas , JC40* 8 pulgadas 4 piezas , JC40* 6 pulgadas 6 piezas , JC40* 8 pulgadas 6 piezas , JC12*40 pulgadas 4 piezas NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. Advertencia de seguridad Lea y comprenda este manual completo antes de ensamblar, instalar, operar o dar servicio a este producto.
GUARDA ESTAS INSTRUCCIONES ESPECIFICACIONES Modelo JC40 * 6 pulgadas 3 piezas Tamaño del borde metálico único 40*6 pulgadas Color Negro Modelo JC40* 8 en 3 piezas Tamaño del borde metálico único 40*8 pulgadas Color Negro Modelo JC40*6 pulgadas 4 piezas Tamaño del borde metálico único 40*6 pulgadas Color Negro Modelo JC40* 8 en 4 piezas Tamaño del borde metálico único 40*6 pulgadas Color Negro Modelo JC40*6 pulgadas 6 piezas 3
Tamaño del borde metálico único 40*6 pulgadas Color Negro Modelo JC40* 8 en 6 piezas Tamaño del borde metálico único 40*8 pulgadas Color Negro Modelo JC12 * 40 pulgadas 4 piezas Tamaño del borde metálico único 40*12 pulgadas Color Negro COMPONENTES Modelo JC40*6 en 3 piezas Borde metálico Conector x3 _ x5 _ x3 x5 Guantes JC40 * 8 pulgadas 3 piezas JC40* 6 en 4 piezas X1 _ x4 x6 x4 _ x6 _ JC40*8 pulgadas 4 piezas 4
JC40*6 pulgadas 6 x6 _ x8 _ x6 _ x8 _ x4 _ x6 _ piezas JC40*8 pulgadas 6 piezas JC12*40 pulgadas 4 piezas Herramientas necesarias 1. pala 2.Martillo y un bloque de madera. Instrucciones de montaje PASO 1 Prepare una línea para que la siga el borde y elimine cualquier obstrucción. Si el terreno es pedregoso, afloje con un pico.
NOTA: No corte con nada ya que puede causar lesiones . PASO:3 Inserte los bordes metálicos conectados en el suelo y asegúrelos con un martillo. NOTA: Coloque un trozo de madera sobre el borde metálico cuando golpee con un martillo para evitar dañar el borde metálico. PASO:4 Inserte un conector para fijar la conexión.
Declaración complementaria : La barrera metálica se puede doblar en la forma que necesite según sus necesidades (incluidas, entre otras, las siguientes formas). ① ② ③ Dirección: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Importado a AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importado a EE. UU.: Sanven Technology Ltd.
Hecho en china 8
Técnico Certificado de soporte y garantía electrónica www.vevor.
Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support BORDO IN METALLO MANUALE D'USO We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
METAL EDGING Modello: JC40*6in 3 pezzi , JC40* 8 in 3 pezzi , JC40*6in 4 pezzi , JC40* 8 in 4 pezzi , JC40*6in 6 pezzi , JC40* 8 in 6 pezzi , JC12*40in 4 pezzi NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
Avvertenza di sicurezza Leggere e comprendere l'intero manuale prima di assemblare, installare, utilizzare o sottoporre a manutenzione questo prodotto. La mancata osservanza di queste avvertenze e istruzioni può causare morte, lesioni personali o danni a beni di valore. Indossare occhiali di sicurezza approvati ANSI, guanti da lavoro pesanti e scarpe di sicurezza durante il montaggio e l'installazione di questo prodotto.
SPECIFICHE Modello JC40*6 pollici 3 pezzi Dimensioni del bordo metallico singolo 40*6 pollici Colore Nero Modello JC40* 8 pollici 3 pezzi Dimensioni del bordo metallico singolo 40*8 pollici Colore Nero Modello JC40*6 pollici 4 pz Dimensioni del bordo metallico singolo 40*6 pollici Colore Nero Modello JC40* 8 pollici 4 pz Dimensioni del bordo metallico singolo 40*6 pollici Colore Nero Modello JC40*6 pollici 6 pezzi Dimensioni del bordo metallico singolo 40*6 pollici Colore Nero
singolo Colore Nero Modello JC12*40 pollici 4 pezzi Dimensioni del bordo metallico singolo 40*12 pollici Colore Nero COMPONENTI Modello Bordo in metallo Connettore x3 _ x5 _ x3 x5 x4 x6 x4 _ x6 _ x6 _ x8 _ x6 _ x8 _ x4 _ x6 _ JC40*6 in 3 pezzi JC40*8 pollici 3 pezzi JC40* 6 pollici 4 pezzi JC40*8 pollici 4 pezzi JC40*6 pollici 6 pezzi JC40*8 pollici 6 pezzi JC12*40 pollici 4 pezzi Strumenti richiesti 4 Guanti X1 _
1. Vanga 2.Martello e un blocco di legno Istruzioni per il montaggio FASE 1 Preparare una linea da seguire per il bordo e rimuovere eventuali ostruzioni. Se il terreno è sassoso, allentare con il piccone. FASE 2 Istruzioni per la piegatura : si consiglia di utilizzare un banco da lavoro, il bordo di un tavolo, una tavola di legno o altro per piegare il bordo metallico all'angolazione richiesta.
NOTA: non tagliare con oggetti poiché potrebbe causare lesioni . PASSO:3 Inserisci i bordi metallici collegati nel terreno e fissali con un martello. NOTA: posizionare un pezzo di legno sul bordo metallico quando si colpisce con un martello per evitare di danneggiare il bordo metallico. PASSO:4 Inserisci un connettore per fissare la connessione.
① ② ③ Indirizzo: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Importato in AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato negli Stati Uniti: Sanven Technology Ltd.
Tecnico Supporto e certificato di garanzia elettronica www.vevor.
Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.com/support OBRZEŻE METALOWE INSTRUKCJA OBSŁUGI We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
METAL EDGING Model: JC40*6 cali 3 szt. , JC40* 8 cali 3 szt . , JC40*6 cali 4 szt. , JC40* 8 cali 4 szt. , JC40*6 cali 6 szt . , JC40* 8 cali 6 szt ., JC12*40in 4 szt. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
Bezpieczeństwo i ostrzeżenie Przeczytaj i zrozum całą niniejszą instrukcję przed montażem, instalacją, obsługą lub serwisowaniem tego produktu. Niezastosowanie się do tych ostrzeżeń i instrukcji może spowodować śmierć, obrażenia ciała lub uszkodzenie cennego mienia. Podczas montażu i instalacji tego produktu należy nosić zatwierdzone przez ANSI okulary ochronne, wytrzymałe rękawice robocze i obuwie ochronne.
SPECYFIKACJE Model JC40*6 cali 3 szt Rozmiar pojedynczej metalowej krawędzi 40*6 cali Kolor Czarny Model JC40* 8 w 3szt Rozmiar pojedynczej metalowej krawędzi 40*8 cali Kolor Czarny Model JC40*6 cali 4 szt Rozmiar pojedynczej metalowej krawędzi 40*6 cali Kolor Czarny Model JC40* 8 w 4 szt Rozmiar pojedynczej metalowej krawędzi 40*6 cali Kolor Czarny Model JC40*6 cali 6 szt Rozmiar pojedynczej metalowej krawędzi 40*6 cali Kolor Czarny Model JC40* 8 w 6 szt Rozmiar pojedynczej
metalowej krawędzi Kolor Czarny Model JC12*40 cali 4szt Rozmiar pojedynczej metalowej krawędzi 40*12 cali Kolor Czarny SKŁADNIKI Model Metalowa krawędź Złącze JC40*6 w 3szt x3 x5 JC40*8 cali 3szt x3 x5 JC40* 6 w 4szt x4 x6 x4 x6 x6 x8 x6 x8 x4 x6 JC40*8 cali 4 szt JC40*6 cali 6 szt JC40*8 cali 6 szt JC12*40 cali 4 szt Wymagane narzędzia 1.
2.Młotek i klocek drewna Instrukcje montażu KROK 1 Przygotuj linię, po której będzie przebiegać obrzeże i usuń wszelkie przeszkody. Jeśli ziemia jest kamienista, poluzuj ją kilofem. KROK 2 Instrukcje dotyczące gięcia : Do zginania metalowej krawędzi pod wymaganym kątem zaleca się stół warsztatowy, krawędź stołu, drewno lub inną deskę.
UWAGA: Nie przecinaj niczym, ponieważ może to spowodować obrażenia . KROK:3 Wbij połączone metalowe krawędzie w ziemię i zabezpiecz młotkiem. UWAGA: Podczas uderzania młotkiem umieść kawałek drewna na metalowej krawędzi, aby uniknąć uszkodzenia metalowej krawędzi. KROK:4 Włóż złącze, aby naprawić połączenie. Oświadczenie uzupełniające : Metalową barierę można wygiąć do wymaganego kształtu, zgodnie z własnymi potrzebami (w tym między innymi następujące kształty).
① ② ③ Adres: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Szanghaj Import do AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Import do USA: Sanven Technology Ltd.
Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.
Technisch Support- und E-Garantie-Zertifikat www.vevor.com/support METALLKANTE BENUTZERHANDBUCH We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
METAL EDGING Modell: JC40*6 Zoll 3 Stück , JC40* 8 Zoll 3 Stück , JC40* 6 Zoll 4 Stück , JC40* 8 Zoll 4 Stück , JC40*6 Zoll 6 Stück , JC40* 8 Zoll 6 Stück , JC12*40 Zoll 4 Stück NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. Sicherheitswarnung Lesen und verstehen Sie dieses gesamte Handbuch, bevor Sie dieses Produkt zusammenbauen, installieren, bedienen oder warten.
Stellen Sie sicher, dass für den Austausch und die Reparatur nur Originalteile verwendet werden.
Modell JC40*6in 6 Stk Größe der einzelnen Metallkante 40 * 6 Zoll Farbe Schwarz Modell JC40* 8 in 6 Stk Größe der einzelnen Metallkante 40 * 8 Zoll Farbe Schwarz Modell JC12*40in 4St Größe der einzelnen Metallkante 40 * 12 Zoll Farbe Schwarz KOMPONENTEN Modell Metallkante Verbinder x3 x5 x3 x5 x4 x6 x4 x6 JC40*6in 6 Stk x6 x8 JC40*8in 6 Stk x6 x8 JC40*6 in 3 Stück JC40*8in 3St JC40* 6 Zoll 4 Stück JC40*8in 4 Stück 4 Handschuhe X1
JC12*40in 4 Stück x4 x6 Notwendige Werkzeuge 1. Spaten 2.Hammer und ein Holzblock Montageanleitung SCHRITT 1 Bereiten Sie eine Linie vor, der die Kante folgen soll, und entfernen Sie alle Hindernisse. Wenn der Boden steinig ist, lockern Sie ihn mit einer Spitzhacke. SCHRITT 2 Biegeanweisungen : Zum Biegen der Metallkante auf den erforderlichen Winkel wird eine Werkbank, eine Tischkante, ein Holz oder eine andere Unterlage empfohlen.
HINWEIS: Schneiden Sie nicht mit Gegenständen, da dies zu Verletzungen führen kann . SCHRITT:3 Stecken Sie die verbundenen Metallkanten in den Boden und befestigen Sie sie mit einem Hammer. HINWEIS: Legen Sie beim Schlagen mit einem Hammer ein Stück Holz über die Metallkante, um eine Beschädigung der Metallkante zu vermeiden. SCHRITT:4 Stecken Sie einen Stecker ein, um die Verbindung zu fixieren.
① ② ③ Adresse: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Importiert nach AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australien In die USA importiert: Sanven Technology Ltd.
Technisch Support- und E-Garantiezertifikat www.vevor.
Technique Assistance et certificat de garantie électronique www.vevor.com/support BORDURE EN MÉTAL MANUEL DE L'UTILISATEUR We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
METAL EDGING Modèle : JC40 * 6 pouces 3 pièces , JC40 * 8 pouces 3 pièces , JC40 * 6 pouces 4 pièces , JC40 * 8 pouces 4 pièces , JC40 * 6 pouces 6 pièces , JC40 * 8 pouces 6 pièces , JC12 * 40 pouces 4 pièces . NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product. Alerte de sécurité Lisez et comprenez l'intégralité de ce manuel avant d'assembler, d'installer, d'utiliser ou d'entretenir ce produit.
CONSERVEZ CES INSTRUCTIONS CARACTÉRISTIQUES Modèle JC40 * 6 pouces 3 pièces Taille du bord métallique unique 40*6 pouces Couleur Noir Modèle JC40* 8 en 3 pièces Taille du bord métallique unique 40*8 pouces Couleur Noir Modèle JC40 * 6 pouces 4 pièces Taille du bord métallique unique 40*6 pouces Couleur Noir Modèle JC40* 8 en 4 pièces Taille du bord métallique unique 40*6 pouces Couleur Noir Modèle JC40 * 6 pouces 6 pièces 3
Taille du bord métallique unique 40*6 pouces Couleur Noir Modèle JC40* 8 en 6 pièces Taille du bord métallique unique 40*8 pouces Couleur Noir Modèle JC12 * 40 pouces 4 pièces Taille du bord métallique unique 40*12 pouces Couleur Noir COMPOSANTS Modèle JC40*6 en 3 pièces Bordure en métal Connecteur x3 _ x5 _ x3 x5 Gants JC40 * 8 pouces 3 pièces JC40* 6 en 4 pièces JC40*8 pouces 4 pièces JC40*6 pouces X1 _ x4 x6 x4 _ x6 _ x6 _ x8 _ 4
6 pièces JC40*8 pouces 6 pièces x6 _ x8 _ x4 _ x6 _ JC12 * 40 pouces 4 pièces Outils requis 1. Bêche 2. Un marteau et un bloc de bois Instructions d'assemblage ÉTAPE 1 Préparez une ligne que la bordure devra suivre et éliminez toute obstruction. Si le sol est pierreux, desserrez avec une pioche. ÉTAPE 2 Instructions de pliage : Un établi de travail, le bord d'une table, un bois ou autre forme est conseillé pour plier le bord métallique à l'angle requis.
REMARQUE : Ne coupez rien car cela pourrait provoquer des blessures . ÉTAPE : 3 Insérez les bords métalliques connectés dans le sol et fixez-les avec un marteau. REMARQUE : Placez un morceau de bois sur le bord métallique lorsque vous frappez avec un marteau pour éviter d'endommager le bord métallique. ÉTAPE : 4 Insérez un connecteur pour fixer la connexion.
Déclaration complémentaire : La barrière métallique peut être pliée dans la forme dont vous avez besoin en fonction de vos besoins (y compris, mais sans s'y limiter, les formes suivantes). ① ② ③ Adresse : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Importé en Australie : SIHAO PTY LTD, 1 ROKEVA STREETASTWOOD NSW 2122 Australie Importé aux États-Unis : Sanven Technology Ltd.
Fabriqué en Chine 8
Technique Assistance et certificat de garantie électronique www.vevor.
Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support METALEN RANDEN HANDLEIDING We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
METAL EDGING Model: JC40*6in 3 stuks , JC40* 8 in 3 stuks , JC40*6in 4 stuks , JC40* 8 in 4 stuks , JC40*6in 6 stuks , JC40* 8 in 6 stuks , JC12*40in 4 stuks NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
Veiligheidswaarschuwing Lees en begrijp deze gehele handleiding voordat u dit product monteert, installeert, bedient of onderhoudt. Het niet opvolgen van deze waarschuwingen en instructies kan de dood, persoonlijk letsel of schade aan waardevolle eigendommen veroorzaken. Draag een ANSI-goedgekeurde veiligheidsbril, stevige werkhandschoenen en veiligheidsschoenen tijdens de montage en installatie van dit product.
SPECIFICATIES Model JC40*6in 3 stuks Grootte van enkele metalen rand 40 * 6 inch Kleur Zwart Model JC40* 8 in 3 stuks Grootte van enkele metalen rand 40 * 8 inch Kleur Zwart Model JC40*6in 4 stuks Grootte van enkele metalen rand 40 * 6 inch Kleur Zwart Model JC40* 8 in 4 stuks Grootte van enkele metalen rand 40 * 6 inch Kleur Zwart Model JC40*6in 6 stuks Grootte van enkele metalen rand 40 * 6 inch Kleur Zwart Model JC40* 8 in 6 stuks Grootte van enkele metalen 40 * 8 inch 3
rand Kleur Zwart Model JC12*40in 4 stuks Grootte van enkele metalen rand 40 * 12 inch Kleur Zwart COMPONENTEN Model JC40*6 in 3 stuks JC40*8in 3 stuks JC40* 6 in 4 stuks JC40*8in 4 stuks JC40*6in 6 stuks JC40*8in 6 stuks JC12*40in 4 stuks Metalen rand Connector x3 x5 x3 x5 x4 x6 x4 x6 x6 x8 x6 x8 x4 x6 Benodigd gereedschap 4 Handschoenen X1
1. Schoppen 2. Hamer en een blok hout Instructies samenstellen STAP 1 Bereid een lijn voor die de rand kan volgen en verwijder eventuele obstakels. Als de grond steenachtig is, maak deze dan los met een houweel. STAP 2 Buiginstructies : Een werkbank, de rand van een tafel, een stuk hout of iets anders wordt geadviseerd bij het buigen van de metalen rand in de gewenste hoek.
OPMERKING: Snijd nergens mee, omdat dit letsel kan veroorzaken . STAP:3 Steek de aangesloten metalen randen in de grond en zet deze vast met een hamer. OPMERKING: Plaats een stuk hout over de metalen rand wanneer u met een hamer slaat om beschadiging van de metalen rand te voorkomen. STAP:4 Plaats een connector om de verbinding te bevestigen.
① ② ③ Adres: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Geïmporteerd naar AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australië Geïmporteerd naar de VS: Sanven Technology Ltd.
Technisch Ondersteuning en e-garantiecertificaat www.vevor.
Teknisk Support och e-garanticertifikat www.vevor.com/support METALLKANT ANVÄNDARMANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
METAL EDGING Modell: JC40 *6in 3st , JC40* 8 i 3st , JC40 * 6in 4st , JC40* 8 i 4st , JC40*6in 6st , JC40* 8 i 6st , JC12* 40in 4st NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
Säkerhet och varning Läs och förstå hela denna manual innan du monterar, installerar, använder eller servar denna produkt. Underlåtenhet att följa dessa varningar och instruktioner kan orsaka dödsfall, personskada eller skada på värdefull egendom. Bär ANSI-godkända skyddsglasögon, kraftiga arbetshandskar och skyddsskor under montering och installation av denna produkt.
SPECIFIKATIONER Modell JC40*6in 3st Storlek på Enkel metallkant 40*6 tum Färg Svart Modell JC40* 8 i 3 st Storlek på Enkel metallkant 40*8 tum Färg Svart Modell JC40*6in 4 st Storlek på Enkel metallkant 40*6 tum Färg Svart Modell JC40* 8 i 4 st Storlek på Enkel metallkant 40*6 tum Färg Svart Modell JC40*6in 6 st Storlek på Enkel metallkant 40*6 tum Färg Svart Modell JC40* 8 i 6 st Storlek på Enkel metallkant 40*8 tum Färg Svart Modell JC12*40in 4st Storlek på Enkel meta
KOMPONENTER Modell Metallkant Anslutning JC40*6 i 3 st x3 x5 JC40*8in 3st x3 x5 JC40* 6 i 4 st x4 x6 JC40*8 tum 4 st x4 x6 JC40*6tum 6 st x6 x8 JC40*8 tum 6 st x6 x8 x4 x6 JC12*40tum 4 st Handskar X1 Nödvändiga verktyg 1. Spader 2.Hammare och ett träblock Monteringsanvisningar STEG 1 Förbered en linje som kanterna ska följa och ta bort eventuella hinder. Om marken är stenig, lossa med hacka.
STEG 2 Böjningsinstruktioner : En arbetsbänk, kanten på ett bord, en timmer eller annan form rekommenderas när du böjer metallkanten till önskad vinkel. OBS: Skär inte med något eftersom det kan orsaka skada . STEG:3 Sätt in de anslutna metallkanterna i marken och fäst den med en hammare.
OBS: Placera en träbit över metallkanten när du slår med en hammare för att undvika att skada metallkanten. STEG:4 Sätt i en kontakt för att fixa anslutningen. Kompletterande uttalande : Metallbarriären kan böjas till den form du behöver enligt dina behov (inklusive men inte begränsat till följande former).
Importerad till AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importerad till USA: Sanven Technology Ltd.
Teknisk Support och e-garanticertifikat www.vevor.
