Technical Support and E-Warranty Certificate www.vevor.com/support SPRAY PAINT BOOTH USER MANUAL We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean to cover all categories of tools offered by us.
SPRAY PAINT BOOTH MODEL:4X3X2.75 / 6X3X2.5 / 7X4X2.75 8X4.5X3.3 / 8.5X4.8X3.3 / 10X6X4 NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
1、Safe Instructions WARNING: 1) Avoid using this product in rain, strong wind, hail, and other bad weather. 2) Avoid sharp points, blades, and other items to scratch the product. 3) Keep away from fire sources. 4) The air inside the tent is scarce, so good ventilation must be ensured when painting inside the tent. 5）Due to the large size of this product, installation requires 2 to 4 people toassist. CAUTION: Carefully read instructions and procedures for safe operations.
2、PRODUCT INTRODUCTION Model 4X3X2.75 6X3X2.5 7X4X2.75 8X4.5X3.3 8.5X4.8X3.3 10X6X4 13*10*9ft 20*10*8ft 23*13*8.
3、PACKAGE CONTENT model 4X3X2.75 6X3X2.5 7X4X2.75 8X4.5X3.3 8.5X4.8X3.
4.PRODUCT DIAGRAM 1. Front Door 2. Air Column 3. Light Hook 4. Ceiling 5. Rope Ring 6. Activated Carbon Filter Cotton 7. Handle 8. Ventilating Tube 9. Air Column Filling Tube 10.Air Blower 11. Transparent Window 12. Emergency Escape Window 13. Double Filter Cotton 14. Exhaust Zipper Port 15. Bottom 16. Metal Ring 17.
5.INSTALLATION INSTRUCTION 1. Unfold the tent and 2.Zip up both sides of the 3. Tie the rope to the spread it out on a clean product. rope ring. 4. Tie the air tube to the 5. When the tent is 6. When the assembly is air blower outlet, as inflated, please fasten complete, please tie the shown in the figure. 1 is the tent with stakes at the windproof rope to the the ventilation blower; 2 bottom metal rings. fixed object. and level ground. is the inflation blower.
6、Storage Instruction It is recommended to store the product when it is dry to avoid dampness and mildew. It is recommended to put them in a storage bag and store them in a dry environment. Keep away from sharp objects to avoiding scratching. After wet weather, it is recommended to air the tent on sunny days. 1.Unzip and open the 2. Turn off the air 3. Drain all air and front and back doors. blowers and open both flatten the tent as exhaust zipper ports. shown below. 4. Roll up the tent, as 5.
7 Direction for Use 1) This product is only a simple tool room for painting and can not be used in windy and rainy days. 2) The product requires the blower to keep inflating , and do not to cut off the power supply. 3) In case of power failure, please escape through the front door or safety window or back door. 4) In case of emergency, you can cut through the tent with a knife to escape. 5) It is recommended to choose a flat and clean open ground to use this product.
8.Maintenance, Repair, and Troubleshooting 1) When the product is finished, it is recommended to dry the tent and put it away. 2) If the product is stored in a humid environment, it is recommended to take it out to open it in sunny weathers. 3) If the product is torn, please repair it with the accompanying material and tools.
Technical Support and E-Warranty Certificate www.vevor.
