1. The load (appliances) power aka the output of inverter shall not be greater than the rated power, which could lead the inverter out of work. 2. Please ensure the the input voltage of the inverter of the battery shall comply with the rated voltage, the inverter would be damaged, if the input voltage would be greater than 1.6 times the rated voltage. 3. When connected with inductive or capacitive load, please reverse the allowance 3-5 times of load power. (aka 4-6 x Appliance power) 4.
High frequency inverter Instructions for use Please read this manual carefully before using products. Thank you for choosing the vehicle inverter provided by us. We hope our products can bring you the most satisfied service. 1) Product Description This high frequency inverter has adapted SPWM technology, and it's highly efficient and reliable. Product has passed lS09001:2000.
1. Loads are reduced to accepted level, the inverter will resume working. 2. Short circuit protection: inverter is with short circuit protection. 3. Over-temperature protection: when the inside temperature of the inverter reach 80℃, the RED indication light will be on. The inverter will stop working, once the temperature drops to accepted level, the inverter will automatically resume working. 4.
1. Reverse connection between the inverter and battery is strictly prohibited, it will burn the fuse of the inverter. 2. Please double check if the voltage of the battery matches the inverter input DC voltage, mismatch connection between the inverter and battery can cause serious damage. 3. Double check if the connections are correct, make sure the connections are tight and firm. 4. Do not extend the inverter power cable. 5.
2. The failure range of this insurance clause does not include damage caused by external factors: incorrect installation, misuse or improper operation, unauthorized private maintenance, damage during transportation, etc. 8) Random Accessories Products are carefully tested and inspected prior to shipment, but it is still possible to receive damage in transit, please carefully check the equipment before installation. If there is any damage, contact the distributor in time. 1.
10)Instructions for external wired remote control equipment Equipment introduction: The inverter can be remotely controlled to turn on and off. Digital display battery voltage value. The equipment adopts a wall switch design scheme, which can be installed in RVs and homes according to user needs. Comes with convenient stickers, which can be pasted at will.
①:Backlight On/Of ②:Lead-acid / Lithium ③:Inverter switch key Remote Control Connection Diagram 8
Packing list Inverter 1 Input wiring 2 Remote control 1 Remote control cable 1 Fuse 1 Instructions 1 Inverter basic fault and troubleshooting method fault Fault embodiment Exclusions The battery is low Start by making an alarm sound (judge the alarm sound as one, BI-BI-BI... ), the LED red light flashes, The voltage continues to decrease and the machine shuts down. The battery is fully charged The battery voltage is high Alarm sound first (judge alarm sound is two, BIBI - BIBI - BIBI...