Instructions / Assembly

The instructions
●Stainless steel telescopic pole(1.1m-2m) is included,which can be firmly in the pole holder
mount.
●The height of the lampshade can be adjusted to sit or stand comfortably.
●It can be neatly folded when not in use.
●Used for anchoring or driving ai a maximum speed of 20 knots
Installation steps
①Awnings end use magic stick is fixed
on the ship T tent.
②
Awning on the other end with a ribbon
on the metal round hole in the metal rod.
③Ribbon metal rods are connected at one
end, and the other end connected to the
ship, to a fixed metal rod.
④
Ribbon ② are connected at one end,
and the other end connected to the ship,
to prevent the metal round hole from the metal rod.
⑤Awnings metal rods, used to support the other end.
Notice ：Be careful with sharp scratches