Technical Support and E-Warranty Certificate www.vevor.com/support GRINDER USER MANUAL MODEL: SX-2A SX-4A SX-6B SX-8B SX-10B We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
GRINDER SX-2A SX-4A SX-6B SX-8B SX-10B SX-2A SX-4A SX-6B SX-8B SX-10B NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
Note: Before beginning assembly of product, make sure all parts are present. Compare parts with package content list and hardware contents. Do not attempt to assemble the unit if any parts are missing or damaged. Contact customer service for replacement parts. Warnings When using electrical appliances, basic safety precautions should always be followed including the following: SAVE THIS INSTRUCTION! 1.
change or alter the plug in any way. NEVER break off a grounding prong from a 3--‐conductor plug. Doing so will invalidate the warranty and may cause electric shock. 11.Place the grinder on a firm and stable surface. Ensure that the grinder is not placed near the edge of the worktop, where it can be easily pushed off or fall. 12.The Gear Housing and the Motor Cover may become HOT during operation. This is nor mal. DO NOT TOUCH these parts while operating. 13.
23.Type X attachment: If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. 24.Do not fill the grinding tank to full otherwise it will cause overload. The material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the tank. Because this machine needs a space to complete the cycle of the blades and the material to be grind. 25.
PRODUCT STRUCTURE -5-
OPERATING INSTRUCTION 1. Operations Guide: 1)Open the upper cover and put the dried material inside; 2)Close the upper cover tightly; (Please make sure the lid is rotated to the end and locked tightly on the top.
* What to do if the grinder suddenly stops working? If the grinder stopped working, the reason may be that the blades bottom is stuck or the overload protector function works because of overload and the carbon brush is worn. It's easy to solve this problem.
damage to the motor. 3) Put too much materials into the grinding bin one time. The material you gonna to grind one time must cover the long blade in the middle and no more than 2/3 of the tank. Because this machine needs a space to complete the cycle of the blades and the material to be grind. If the machine overheat makes ono-working, you can also solve it by re-installing the carbon brushes on the both sides again and then pressing the overload protector button again, then the grinder could work well.
HOW TO CLEAN UP THE GRINDING BIN You can clean up the grinding bin of grinder with a brush first,and then clean it with dry cloth. After using blades for a long time ,you can remove them and clean them with water.(The blades of new grinder must be very tight,you need to use for a long time,then blades can be removed.) • Firstly, loosen the nut by using a pincer and remove the blade. • Secondly, wipe the grinding bin with a dry rag after removal of the blade, and please do not clean with water directly.
OPERATING PROCEDURES OF REPLACING BLADES - 10 -
HOW TO REPLACE CARBON BRUSHES • The upright type grinder: • The swing type grinder: - 11 -
TROUBLE SHOOTING Trouble Elimination method (*Please cut off Cause the power when doing following) Please plug in the power cord and Poor contact between the plug and socket. check whether the power indicator lights is on. If the indicator does not light, then the power cord is faulty. The machine does not operate after power on. Adjust the position of the screws Poor contact between on both sides of the lid in advance the lid and induction so that they can trigger the switched.
Stuck inside of crush cabin by material, or Motor run slowly,or not Remove the stuck stuff. foreign subject. runs, even Insert the plug directly wall socket vibrates,making noise. Low power voltage. instead of the terminal block. Then try another place to see if the machine can be turned on. Reducing the amount of grinding Over load capacity. and decreasing the working pressure. Motor cabin over heat. Material not dry Dry the material in the sun or bake enough. it.
Importer: WAITCHX Address: 250 bis boulevard Saint-Germain 75007 Paris Importer: FREE MOOD LTD Address: 2 Holywell Lane, London, England, EC2A 3ET UK REP EC REP EUREP UK LTD UNIT 2264, 100 OCK STREET, ABINGDON OXFORDSHIRE ENGLAND OX14 5DH EUREP GmbH Unterlettenweg 1a, 85051 Ingolstadt, Germany Manufacturer: Anhui Xuzhong Intelligent Technology Co., Ltd. Address: No.
TechnicalSupport and E-Warranty Certificate https://www.vevor.
