Use and Care Manual

- 12 -
TROUBLE SHOOTING
Trouble
Cause
Elimination method (*Please cut off
the power when doing following)
The machine does not
operate after power on.
Poor contact between
the plug and socket.
Please plug in the power cord and
check whether the power indicator
lights is on.
If the indicator does not light, then
the power cord is faulty.
Poor contact between
the lid and induction
switched.
Adjust the position of the screws
on both sides of the lid in advance
so that they can trigger the
induction switches in the ears
when close the lid.
Air over-load protector
protecting.
Press the air over-load protector to
restart.
Carbon brush ware out.
Change the carbon brush.