Use and Care Manual

- 3 -
change or alter the plug in any way. NEVER break off a grounding prong from a
3--‐conductor plug. Doing so will invalidate the warranty and may cause electric shock.
11.Place the grinder on a firm and stable surface. Ensure that the grinder is not placed near
the edge of the worktop, where it can be easily pushed off or fall.
12.The Gear Housing and the Motor Cover may become HOT during operation. This is nor
mal. DO NOT TOUCH these parts while operating.
13.To reduce the risk of unintentional starting, check that the control is OFF before pluggin
g the cord into wall outlet. To disconnect, turn the controller to OFF, then remove plug from
wall outlet.
14.DO NOT operate your grinder under a wall cabinet. Always unplug the unit from the elec
trical outlet when storing
it. Not doing so could create a risk of fire, especially if the appliance touches the walls of th
e garage or the door touches the unit as it closes.
15.NEVER plug the grinder in where water may flood the area.
16.To protect against risk of electrical shock, DO NOT submerge the grinder in water or oth
er liquids. Be sure the grinder is disconnected from the power source before cleaning. NEV
ER rinse the Grinder Motor under running water, only use a moist cloth to clean the Grinder
Motor Unit.
17.The use of attachments or parts not specifically recommended or sold by the manufactu
rer for this grinder will void the warranty and may cause fire, electric shock or injury.
18.HANDS WASH ALL PARTS! DO NOT USE DISHWASHER. Never put the unit near a h
ot burner, in an oven, or in a dishwasher.
19.NEVER use abrasive cleaning agents or abrasive cloths when cleaning the grinder.
20.The Manufacturer disclaims any responsibility in the case of improper use of Grinder. Im
proper use of the Grinder voids the warranty.
21.DO NOT REMOVE WARNING LABELS FROM THE GRINDER. Doing so will void the
product warranty and may result in serious personal injury.
22.This appliance must be grounded while in use to protect the operator from electrical
shock. This grinder uses a grounded, three prong plug that should be connected directly to
a grounded 120V(US)/230V(EC), three prong grounded wall outlet receptacle. Grounded
plugs are used on metal-encased electric appliances in order to provide protection from an
electric shock. DO NOT change or alter the plug in anyway. NEVER break off a grounding
prong from a 3-conductor plug. Doing so voids the warranty and may result in electric
shock.