Use and Care Manual

- 6 -
OPERATING INSTRUCTION
1. Operations Guide:
1)Open the upper cover and put the dried material inside;
2)Close the upper cover tightly; (Please make sure the lid is rotated to the end and locked
tightly on the top.)
3)Plug in and turn on the timer switch, then turn on the switch for grinding(Rolling sound
will be heard );
4)Turn off the switch; (When you hear the sound rolling evenly, the material has been
grinded into powder, then you can turn off the switch)
5)Disconnect power supply before opening
6)Open the upper cover and brush the powder out
2.Grinding Cautions:
It is not suitable for grinding something which is wet, fresh, soft ,strong toughness such as
meat, fruits, vegetables, etc.
1)To grind something more easily when the material is high-hardness, big in size, or has
the strong fiber, you need to cut them into small pieces, for example, to grind the
notoginseng better, you need to cut them into small pieces.
2)For the oily items , such as peanuts, sesame, walnut, etc. You should first dry, or fried-dry
them before grinding. If you just grind a small amount , usually grind for 15 seconds , then
stop for 10 seconds. If you need a better grinding effect, you could do this for several times.
Notice: When you first use the machine,you’d better clean the machine with cloth
moistened with vinegar or medical alcohol,and then put some rice and dried tea leaves into
grinding bin,grind them for 30~50 seconds,then pour the power out, clean the grinding bin.
3. Common Questions:
* Why the grinder cannot be started？
First check whether the indicator light is on.
If the indicator light is not on, check whether the power supply is plugged in tightly and
whether the power cord is damaged (you can replace the power cord of other household
appliances).
If the indicator light is on, the possible reason is that the induction switch in the two buckles
of the cover is not triggered yet.