Use and Care Manual

- 8 -
damage to the motor.
3) Put too much materials into the grinding bin one time.
The material you gonna to grind one time must cover the long blade in the middle and no
more than 2/3 of the tank. Because this machine needs a space to complete the cycle of
the blades and the material to be grind.
If the machine overheat makes ono-working, you can also solve it by re-installing the
carbon brushes on the both sides again and then pressing the overload protector
button again, then the grinder could work well.
INSTRUCTIONS OF AIR OVERLOAD PROTECTOR
When blades are jammed in grinding bin, it will happen that air overload protector pop up
and the machine automatically cut off the power supply.
If this situation happens, turn off the power and check the grinding bin. You just need clean
the blades bottom and press the overload protector button again, then the grinder could
work well.
* Upright type grinder:
*Swing type grinder: