Use and Care Manual

2).Operating by telecontroller :Using″down button″ to achieve
longation operation,stopping when travel limit.Releasing
hand is not the order to stop,passing any key again will stop,but
not quickly.It stops after a short distance.
IX.Telecontroller operation
1.Matching window period
Matching window period is repowering after 3 seconds.There
will be buzzing sound when the period stop.
2.Right code
In matching window period,passing the ″up button″longly and
waiting for 4 long and 3 short intervals of buzzing sound,it
means righting code is over.
X.Slow rise and fall
In all modes,the motor starts and stops in a new speed change
mode,named slow rise and fall,to avoid large impact for desktop
when starting and stopping.
XI.Backtracking when encountering obstacles
In addation to the reset state,when working ,the mechanical
structure encounter a sudden changes from loading ,which will
cause the contrller to carry out a fallback operation to prevent
external sound of injury.
P:When resetting,please pay special attention to whether
there are people or objects under the table that may cause
harm.
P:
1.Do not pass the″up button″ in 3
seconds repowering
2. Do not release when passing
the″up button″
3.The buzzing sound for success of
matching is:di~~di~~di~~di~~
di~di~di~
4.Releasing after liseaning the right
buzzing sound