Use and Care Manual

2
+6%
380V -10%
（
342V-403V
）
3
）
Look at the nameplate attached to the rear panel of the machine, to check if the
voltage specified on the machine matches the local power supply voltage.
4
）
Be sure to entrust the electrical construction agency to connect the ground wire.
Otherwise, an electric shock may occur in the event of a malfunction or leakage. (The
grounding yellow-green line is at the bottom of some models.)
5
）
Do not damage the power cord or cause it to be damaged or processed.
Gather the wires into bundles, stretched, barely bent, twisted.
6
）
When the machine is malfunctioning, turn off the power. If a trip occurs, contact
the store or service personnel.
IV
、
Refrigeration Condition
a
、
Refrigeration is not allowed when the empty cylinder has a stirring shaft.
b
、
No cooling when there is water in the tank.
Product Structure
：