Instructions / Assembly

- 3 -
Electrical outlet box part of the electrical contacts should be kept
clean and good contacts, whether the motor air inlet plug, so as not to
affect the motor life. Regular maintenance should be a half a year,
check the motor remove dust and oil, grease and abrasion.
16. The motor running check:
When motor is operated it should always be paid attention to whether
the load data in current with requirement, whether the bearing has
phenomena of heat and leakage, if found abnormal or sound, should
be stopped immediately for inspection. Until fault is identified, do not
do Starting test.
TECHNICAL INFO:
Model No
DP120356L
DP123756
DP120556S
DP120556HZ
Horsepower
3HP
3.7HP
5HP SPL
5HP
Frame Size
56
56
56
56HZ
Rated Current
15.0 A
17.2 A
15.0 A
22.0 A
Shaft Length
1.88"
1.88"
1.88"
2.25"
Shaft Diameter
5/8" Keyed
shaft
5/8" Keyed
shaft
5/8" Keyed
shaft
7/8" Keyed
shaft
Rated Speed
3450 RPM
Phase
One/ Single Phase
Voltage
230V
Frequency
60 Hz
Rotation
CCW/CW
Enclosure
ODP
Insulation
F
Service Factor
1
Duty
Cont. S1
Class of
protection
IP23
DES-AMB
40
℃
Protection
Overload Protection with Manual Reset