Instructions / Assembly

- 5 -
COMMON PROBLEMS AND REMEDIES
Problem 1:
When you receive the motor, please check whether the front shaft of the
motor can rotate. if you find that manual rotation is not possible.
Solution:
The concentricity of the motor may be damaged during transportation. You
can hammer the shaft, front end cover and back end cover with a wooden
hammer or a rubber hammer to adjust the concentricity. Until the shaft of
the motor can be turned flexibly manually.
Problem 2:
The motor does not work when it is powered on.
Solution:
1) Please check the power supply to make sure the output voltage is
correct.
2) Please check the wiring carefully to make sure it's the same as the
wiring diagram.
3) Please press the red protector button, hear the clear "click" reset sound,
then reconnect the power, start the motor.
Problem 3:
After the motor is powered on, it rotates slowly and cannot be started
normally.
Solution:
1) Please check the power supply to make sure the output voltage is
correct.
2) Please check the wiring carefully to make sure it's the same as the
wiring diagram.
3) Check the capacitance of the motor to ensure that the capacitance is in
good condition.
Problem 4:
After running for a period of time, the motor heats up and stops working.
Solution:
Motor overloaded running, protector function. After half an hour of cooling,
press the red protector button to reset and try again.