COMMERCIAL SLUSH MACHINE SERIES PRODUCT INSTRUCTION MANUAL
COMMERCIAL SLUSH MACHINE SERIES PRODUCT INSTRUCTION MANUAL XRJF-21 NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction,Please read all manual instructions carefully before operating. VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
Content 1. Safety Instructions .................................................................................................................................................................03 2. Installation Instructions for The Whole Machine........................................................................................................06 3. Names of Each Part...........................................................................................................................................
Safety Instructions Dear user, Hello! Thank you for using our products, in order for you to better read this manual and use this product, and to prevent personal injury and object damage accidents, please be sure to read carefully and comply with the following symbols in this manual.
When there is a leakage of flammable gases such as gas, the valve of the gas leakage should be closed immediately, and then the doors and windows should be opened, and the plug of electrical devices such as the slushy machines should not be unplugged or plugged. Please install a leakage off circuit protector before use to ensure personal safety and safe use of the product.
This appliance contains combustible blowing agent, beware of fire, (the product has the mark of "beware of fire"). When there is an abnormality in the product, it must be repaired by relevant qualified personnel and institutions. This machine is not intended for use by persons with frailty, children, retardation, or mental disorders, except under the guidance or assistance of a person responsible for safety. Children should be supervised to ensure that children do not play with machines.
Installation Instructions for The Whole Machine Installation of Slushy Machine 1. Remove all packaging components. 2. Check if the machine is damaged during transportation, and then remove the attachments. 3. This series of slushy machine should be placed in a clean place with air circulation, not suitable for open air, not suitable for direct sunlight and rain, nor can it be placed near the heat source. 4. The ambient temperature around the series of machines should not be less than 3 °C/37.
Pre-boot Inspection 1. Is the slushy machine placed horizontally? 2. Is there any problem with the power outlet? 3. Whether the access to the power supply is consistent with the one marked on the machine nameplate. Proper Operation When Using 1. Do not place items on the top cover of this machine, otherwise it will cause noise. 2.
Discharge Valve Assembly Agitator Components Stem Stem O-ring Discharge valve Discharge valve cap Flared seals Scraper Outlet D-ring Stirrer Product Specifications Model XRJF-21 Refrigerating Capacity 24-36L/H Climate Type N/SN Refrigerating R410/650g Input Power 1800W Rated Voltage AC120V 60Hz Foam Material Cyclopentane Net Weight 94KG Dimensions 570*680*925mm Operating Instructions Notice: The left cylinder and the right cylinder correspond to the left system and the right system r
Setting button Left tank Current temperature Current temperature of right tank Current temperature of left freezing cylinder Current temperature of right freezing cylinder Current forming percentage of right cylinder Current percentage of left cylinder forming Number of feeding cups of left cylinder Numbers of feeding cups of right cylinder Left stop button Left slush button Left cleaning button Right cold drink button Left cold drink button Right cleaning button Right slush button Right stop b
Fault Alarm Interface On the setting interface, press "Fault Query" on the touch screen to enter the fault query mode. Displays an alarm interface when a fault occurs during machine operation. 55 Low speed alarm: 220V machine motor speed is lower than 130 rpm to stop the alarm to prevent the motor from being damaged by excessive force. (The motor speed of the 120V machine is lower than 165 rpm and it will stop and alarm.
System 1 (left cylinder) parameter setting interface Slush gear: 1-8 gears are adjustable, press "plus" or "minus" to adjust the gear, The default is gear 3. The higher the gear, the harder the smoothie; and the lower the gear, the smoother you make is softer. Slush cycle time: This time adjusts the cooling system after the slush is 100% formed Stop time, adjustable from 5-20 minutes, press "plus" or "minus" to adjust the gear The default is 10 minutes.
Slush Production 1.Raw Material Preparation According to the manufacturer's operating instructions, dilute the concentrate with water and stir in a suitable container. The mixture contains sugars , the amount of which should be kept between 13%-18%. Lower and higher concentrations can be destroyed agitators and stirring motors. 2.Raw Material Filling Before adding the raw materials, try to ensure that there is no residual moisture in the freezing tank during cleaning.
Simple Cleaning 1.Release all the ingredients 2.Power off the machine 3.Fill the material tank with an appropriate amount of food detergent to prepare hot water that does not exceed 50 ° C, then open the tank cover and pour the hot water into the tank. 4.Turn on the power of the machine, then press the wash button and let the agitator stir for 2-3 minutes. 5.Release all the water from the tank, and then repeat the operation more than 2-4 times. 6.Turn off stirring and power.
Cleaning Method of Parts When using it for the first time or not using it for a long time, please clean the parts before use. Use food detergent and cleaning brushes to clean all parts that have been disassembled Hopper cover Valve pole O seals for valve pole Handle Sealant seals Handle fixing pin Beater Supporting outlet valve Beater scraper Fasten screws Spout seals D Outlet valve cap Drip tray User Considerations Do not damage or lose components during operation.
The Assembly Method of The Component Assembly of The Valve Stem Valve pole 1.Install the O-ring on the valve stem and assemble it according to the diagram. 2.After the O-ring is installed, the surface is greased. O seals for valve pole Assembly of Agitator Components 1.The flared sealing ring is lubricated at both ends. 2.Install the flared seal directly behind the agitator. 3.Mount the scraper on the agitator. The spatula arrangement in the agitator is loose.
Mounting of The Handle Insert the handle socket into the lever pin, then insert the handle pin into the lever holder, and then align the handle pin hole with the vel pin, and then the vel pin goes directly through the handle pin hole. Handle Handle fixing pin Tie rod holder Tie rod pin Installation of Agitators It is important to ensure that the control power switch is turned off. Confirm that the display is off.
Cleaning And Maintenance of The Enclosure Be sure to unplug the power supply and turn off the water source before cleaning. Do not plug the power supply with wet hands, or there will be a risk of electric shock. Wipe the surface of the slushy machine shell by using a soft towel or sponge dipped in warm water (a diluted neutral detergent is available). After washing with detergent, wipe it off promptly with a soft cloth or sponge dipped in water.
Troubleshooting Instructions The slushy machine you receive is a mechatronic professional equipment that integrates computer program control, mechanical transmission and efficient refrigeration system! You must arrange for your own personnel to be responsible for the operation and maintenance of this equipment, at the same time, please understand the installation and maintenance requirements of this equipment in detail when purchasing the machine, and receive professional training before use!!! (Very import
The machine is noisy when pressing the cleaning key The machine is noisy when cooling The cleaning noise will gradually reduce after adding raw materials The ground on which the machine is placed is not horizontal, adjust by yourself The noise will be reduced gradually after adding material when there is a lack of material.
10 11 Machine 55 alarm Unable to reach "99" Tank freezes Proper downward adjustment of gear Motor does not rotate or motor idling speed is slow Call the company's phone number to be handled by the company's professional staff Sensor failure or loose sensor linkage Call the company's phone number to be handled by the company's professional staff Slow motor speed Check if the motor is damaged Improper gear selection Proper downward adjustment of gear Poor cooling Check whether the condenser is
Environmental List Non-environmentally friendly substances or no substances The part name lead mercury cadmium Hexavalent chromium Polybrominated biphenyls Polybrominated diphenyl ethers Fans Motor evaporator : Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in GB/T 26572.
Manufacturer: Hubei Guangshen Electric CO.
E-mail: CustomerService@vevor.
