G29/G920 Gaming Wheel Stand Installation Manual
Stand Bar Retractable Brackets Table Bottom Bracket Pedal All Accessories
Wrench 6 ×M8 56mm Bolts Washers 2PC M8×36mm Bolt 8×8mm Nut 2 PCS M8×40mm Bolt 2 × M8 34mm Plastic Screw 4 × M8 22mm Bolt 14 × M6 Bolts of Gear Shift Support 2 × M8 60mm Plastic Screw 4×Cable Tie 4 × M8 Non-Skid Foot Screw Accessory Kit
Step 1: We need to fix the pedal on the bottom bracket with screws. M8 56mm bolts for the front part and M8 36mm bolts for the back part.
Step 2: First, fix the stand bars on the bottom of the pedal with two M8 60mm plastic screws. Then use two M8 56mm screws (for both sides) to lock the stand bars with nuts. This place is where you screw the bolts in the first step.
Step 3: Fix four M8 non-skid foot screws on the bottom of the bracket. The height of the foot screws can be adjusted according to your needs.
Step 4: Install the retractable brackets with M8 34mm plastic screws. The height of the retractable brackets can be adjusted at any length.
Step 5: Install the table on the top of the retractable brackets with four M8 22mm screws (two screws for each side), and then fix it with nuts.
This is our gaming wheel stand. If you have any other questions, please contact us. We specialize in the production of various game stands. We are glad to provide you products with outstanding quality and proper price.
