Instructions / Assembly

- 5 -
designed.
18.Do not use the power tool if the Power Switch does not turn it on or off.
Any tool that cannot be controlled with the Power Switch is dangerous and
must be replaced.
19.Disconnect the Power Cord Plug from the power source before making
any adjustments, changing accessories, or storing the tool. Such
preventive safety measures reduce the risk of starting the tool accidentally.
20.Store idle tools out of reach of children and other untrained
persons.Tools are dangerous in the hands of untrained users.
21.Maintain tools with care. Properly maintained tools are less likely to clog
and are easier to control. Do not use a damaged tool. Tag damaged tools
"Do not use" until repaired.
22.Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that may affect the tool's operation. If damaged,
have the tool serviced before using. Many accidents are caused by poorly
maintained tools.
23.Use only accessories that are recommended by the manufacturer for
your model.Accessories that may be suitable for one tool may become
hazardous when used on another tool.
SPECIFIC SAFETY RULES FOR THIS PRODUCT
1.Maintain labels and nameplates on the Powder Coating System.These
carry Important information.
2.Always wear ANSI approved safety impact eye goggles, respirator, and
heavy work gloves when using the Powder Coating System. Using
personal safety devices reduces the risk of injury.
3.Maintain a safe working environment. Keep the work area well lit. Make
sure there is adequate surrounding workspace. Always keep the work area
free of obstructions, grease, oil, trash, and other debris. Do not use a
power tool in areas near flammable chemicals, dust, and vapors. Do not
use this product in a damp or wet location.
4.Avoid unintentional starting. Make sure you are prepared to begin work
before turning on the Powder Coating System.