Technical Support and E-Warranty Certificate www.vevor.com/support ELECTRIC THERMO POT INSTANT HOT WATER HEATER MODEL:EKA-3.2ED EKA-4.2ED EKA-5.0ED We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
ELECTRIC THERMO POT MODEL:EKA-3.2ED EKA-4.2ED EKA-5.0ED NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against electrical hazards do not immerse cord, plugs, or the appliance in water or any liquid. 4. Close supervision is necessary when any appliance is used near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before cleaning the appliance. 6.
SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY SHORT CORD INSTRUCTIONS A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. The use of an extension cord is not recommended. 3-PRONG PLUG This appliance is equipped with a grounded-type 3-wire cord (3-prong plug). This plug will only fit into an electrical outlet made for a 3-prong plug. feature.
light is on. Do not obstruct the top lid steam vent. In the unlikely event that this appliance malfunctions, immediately unplug the cord. DO NOT USE or attempt to repair the malfunctioning appliance. PRIOR TO FIRST USE It is recommended that you clean your new Dispensing Kettle/Instant Hot Water Heater thoroughly before using it for the first time. To do this, fill the kettle with fresh water and boil. Discard the water and rinse the inner pot with cold water.
CAUTION: Only open lid when product is cool. If water is still hot, hot vapour may escape. 2. To fill the product, open the top lid as in #1 above. Using a separate water vessel fill the product with the desired amount of water. Do not exceed the MAX level on the inner pot. Always fill the product above the MIN level on the water window before using the product. 3. Place the product on a firm and level surface away from other objects and with good air circulation around and above the product.
3.Unlock indicator light 4.Boil indicator light and Keep-warm indicator light 5.Auto dispense button 6.Unlock button 4. Press the temperature selection button in the control panel to choose the desired keep-warm temperature. Use the chart below as a temperature guide. The green keep-warm indicator light on the control panel will flash when the temperature is selected. This light will illuminate constantly when the desired temperature is reached.
Caution: If the dispense button is not selected within 10 seconds after selecting the unlock button, the appliance will automatically revert back to the lock position. The auto dispensing function will not operate if the product is not connected to power. Note: The unlock button is a safety feature meant to prevent accidental dispensing of hot water from the product through the pressing of a single button. ● MANUAL DISPENSING. (SABBATH MODE) On the upper lid, switch the pump lock to the “unlock” position.
8. If this product is allowed to boil dry, a thermostat will automatically cycle the element off and on to prevent the kettle from overheating. If this situation occurs, unplug the kettle and let it cool before refilling to the proper level. NOTE: If the product is allowed to boil dry, the buttons and lights on the control panel will not operate until the product cools down. til the product cools down.
CAUTION: Use only water to clean this product. Do not use volatile oil thinner, abrasive cleaning powder and nylon brushes etc. Do not put this product in a dishwasher. WARRANTY This product is warranted by Superior Electrics Limited, to be free of mechanical and electrical defects, for one year from the date of purchase from an authorised dealer. Should a defect appear, return the product prepaid to our factory together with proof of purchase date.
chlorine smell When first used, it maybe produce a plastic smell When used on a mat (plastic bag, etc.), Using several times, the smell will disappear Remove odor-causing items sometimes the mat smell will be transferred into hot water.
Technical Support and E-Warranty Certificate www.vevor.
