Instructions / Assembly

- 4 -
Electric Drill Operation:(The drill is not included in the
original configuration)
1. Repeat steps 1-3 of the manual operation (above).
2. Attach your drill to the drain unblocker drill adaptor .
3. Caution:Set your drill to a low torque setting to avoid injury.
4. Start your drill on variable speed setting and increase the rotational
speed according to the obstruction type. Waning Keep hands clear of the
crank handle whilst in use.
5. When the blockage is cleared, remove the cleaning spring by loosening
using the anti-rotation bolt and manually pulling the cleaning spring back
into the storage chamber. Repeat this process until obstruction is cleared.
Caution
Always tighten the anti-rotation bolt before turning the cleaning spring
manually or with an electric drill.
Always point the spring away from the body whilst loosening the anti-
rotation bolt.
When clearing blocked sinks, remove water filters and other objects.
Always wear gloves and eye protection when clearing drains.
We recommend that the cleaning spring is cleaned and left to dry before
storing back into the storage chamber for future use.