Installation Guide

- 4 -
2. Take the WALL BRACKET and place it against either a wall or wooden
post.
3. Mark inside the centre of each of the bracket holes to prepare for drilling.
If you are attaching your Hose Reel to a wooden post, you will not
require the WALL PLUGS as the COACH BOLTS can screw directly into
wood.
4. Use the table below to select the correct drill bit for your Hose Reel.
If using plugs that were not included with your Hose Reel, drill slightly
undersize as masonry materials all have different properties which will
ensure the wall plugs have a secure fit.
It is very important to use the correct size drill bit, so a very secure fit of
the wall bracket is made before installing the Retractable Hose Reel.
5. When ready, drill all four holes, then hammer the WALL PLUGS gently
into your wall (if attaching to a wall).