Use and Care Manual

X1.GW531B.TY.F01M.Manufacturer Instruction Manual. 4/13
9 User Parameters Table
The implication of each parameter in the user parameters is listed in the following table:
No.
Parameter
Name
Factory
Default
Setting Range
Remark
1
Lock T.set
No
Yes ~ No
Yes: the set temperature can not be modified on the
main screen when locked.
No: the set temperature can be modified on the main
screen.
2
T.setpoint
12.0℃
[T.setpoint min]
~[ T.setpoint
max]
Setting range is limited by the manufacturer
parameters [T.setpoint max], [T.setpoint min].
(When the [TEMP Unit] is set “Fahrenheit”, the
parameter is not displayed.)
3
T.setpoint
53.6 ℉
[T.setpoint min]
~[ T.setpoint
max]
Setting range is limited by the manufacturer
parameters [T.setpoint max], [T.setpoint min].
(When the [Temp Unit] is set “Celsius”, the parameter
is not displayed.)
4
TEMP Unit
Celsius
Celsius ；
Fahrenheit
5
Contrast
32
20~44
Adjust the LCD contrast
6
On/Off type
Local
Local / Local +
Remote / Remote
Local: the unit can only start and stop locally.
Local + Remote: the start and stop of the unit can be
controlled both locally and remotely.
Remote: the unit can only start and stop remotely.
7
Backlight on
0
0~255 minute(s)
0: backlight won’t be turned off.
8
Language
中文
中文~English
Select the display language.
10 Manufacturer Menu
Press + in the main screen to enter the Enter Password screen and enter the correct
manufacturer password (default 4561, changing it is strongly recommended). Then enter the Manufacturer
Function Menu.
10.1 Procedures of Entering Manufacturer Menu
10.2 Details of Manufacturer Menu
The details and function of manufacturer menu are as follows:
No.
Parameter Item
Function
Remark s
1
Manuf.setting
To set the parameters commonly
used by the manufacturer
Refer to 13 Manufacture
Parameters for specific parameters.
2
Manuf.Debug
To debug the abnormal operation
of each electrical part of the unit
Not accessible during the unit
running.
3
Config guide
Commonly used parameters of
config the unit
Not accessible during the unit
running.
This screen will pop up when
powered on for the first time.