Use and Care Manual

- 13 -
appliance. The filter may be cleaned with the cleaning brush attached.
TROUBLESHOOTING
If any irregularities are found during operation of the appliance, read the table
below to identify the cause and to ind a solution to the problem .
Problem
Possible cause
Solution
The appliance does
not turn on .
1. Incorrect installation of the
central ring .
2 . Head cover installed in
wrong place.
1. Install the central ring in a
proper place.
2 . Install head cover in place .
3 . Replace the lid .
During the first start
of the appliance,
unpleasant smell
may
be released .
It is normal.
Please send the product to our
company’s maintenance point
nearby if the product still gives
off unpleasant smell after
repeated use.
The product stops
while in operation.
1. Under voltage
2 . Excessive ingredients
3 . Push the rod with
excessive force
4 . Motor thermal control
protection
1. Check if under voltage
2 . Disconnect power, take out
the surplus ingredients .
3 . Push the rod gently.
4 . Restart it after stopping 20-
30 minutes .
The juice contains
a lot of pulp .
1. Juice extraction net
damaged .
2 . Too much pomace in the
central ring .
1. Replace the net .
2 . Clean the central ring .