Use and Care Manual

- 7 -
1
Put central ring on the body.
2
Put the filter into the central ring and make sure
it is in the right place on the motor wheel.
( Before using, check if the filter is not damaged.
If any damage is detected, stop using the
appliance and immediately contact our customer
service department nearby).
3
Install the lid on the juicer body in the right place
– as shown in the figure.
Snap the safety clamps on the lid and lock them
down. The assembly has been done correctly if
you hear a “click” sound.
4
Put the pulp container under the body, as shown
in the figure.