Use and Care Manual

- 17 -
Hook
Sometimes, the kneading blade would stay in the bread when putting out
the bread. Use the hook to pull out the blade.
TROUBLE SHOOTING
Below trouble shooting only for your reference when during in the
use, if appliance has damage, for avoid danger or more loss, please
send to maintenance station or dial advice line for help.
NO.
Problem
Cause
Solution
1
Smoke
from
ventilation
hole when
baking
Some ingredients adhere to
the heat element or nearby,
for the first use, oil
remained on the surface of
heat element
Unplug the bread maker
and clean the heat
element, but be careful
not to burn you, during
the first use, dry
operating and open the
lid.
2
Bread
bottom
crust is too
thick
Keep bread warm and
leave bread in the bread
pan for a long time so that
water is losing too much
Take bread out soon
without keeping it warm
3
It is very
difficult to
take bread
out
Kneader adheres tightly to
the shaft in bread pan
After taking bread out, put
hot water into bread pan
and immerse kneader for
10 minutes, then take it out
and clean.
Hook