Instructions / Assembly

- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:(1)This device may
not cause harmful interference, and (2)this device must accept
any interference received, including interference that may
cause undesired operation.

Make sure the electricity is off before installing the fixture.

The circuit connection must be correct before connecting the wire.

Don’t worry about the heat on the surface of the lamp when it’s
working. It’s a normal situation.

The lifespan will be shorter and the light attenuation will be faster if the
lamp works for 24 hours every day.

Make sure output voltage is within the range of rated voltage before
installing the lamp.
If the lamp doesn’t work, don’t inspect it when power is on.The lamp should
be inspected and maintained by professional electrician.
FUNCTION INTRODUCTION
• Easy installation
•16 color modes
• High brightness
•Low power consumption
•Can be widely used in swimming pool, bathroom, fountain, etc
•Stainless steel housing
•High quality LED light source, life time more than 30000 hours
•The lamp is potting protected by epoxy resin + sealed silica gel, and the
waterproof grade is above IP68