Instructions / Assembly

- 4 -
OPERATION INSTRUCTIONS
• Install lamps, controllers and power supplies in appropriate areas, and
protect exposed wires
• Ensure that the power supply output voltage conforms to the luminaire
parameters
• Connect the power supply, lamps and controllers according to the
requirements marked on the lamps and the color of the wires
• After the installation of the line to check the correct, turn on the power to
use
PRECAUTIONS
• Before powering on, make sure all wiring is correct and the wires are not
broken
• The power lead of the lamp is adjusted according to the
design requirements, and the voltage, current and all
parameters are in the best state. It is necessary for the user
to select a cable diameter thicker than the dominant cable
when extending the dominant cable. However, it is
prohibited to cut the cable.
• When the underwater light is lit, it must be placed in the
water, otherwise it will affect the life of the lamp, and even
burn the entire product.