Instructions / Assembly

4
The use of any extension cord will cause some loss
of power. To keep this to a minimum and to prevent
overheating and motor burn out, use the table to
determine the minimum wire size (A.W.G.) for an
extension cord. Use one a 3-wire extension cord
which have 3-prong grounding type plugs and 3-pole
receptacles which accept the tool’s plug.
PARTS IDENTIFICATION
ON/OFF SWITCH: Device to turn the Wood Lathe power ON or OFF.
BELT AND PULLEY COVER: Cover for the Belt and Pulley. Open this
cover when changing the speed of the drive center.
DRIVE CENTER: Holds the work piece for turning jobs.
BED RAILS: Rails r moving tail stock and tool rest.
TOOL REST: Holds the tool then turning the work piece.
TOOL REST LOCK KNOB: Lock knob for heigh adjustment of the tool
rest.
TAIL STOCK ASSEMBLY: Works with the drive center to hold the
work piece for turning jobs.
DIAGRAM AND SPECIFICATIONS
YSMachinery-VEVOR