Use and Care Manual

Care & Cleaning

HOW TO CLEAN YOUR FONDUE POT

WARNING: ALWAYS TURN PROBE CONTROL TO OFF THEN DISCONNECT

PLUG FROM WALL OUTLET BEFORE DISCONNECTING THE CORD.

Your Fondue Pot should be cleaned after every use.

1. Unplug the fondue and allow it to cool before cleaning. NOTE: To protect the

nonstick coating, do not run cold water over cooking surface immediately after

use.

2. Remove the temperature control probe. DO NOT IMMERSE TEMPERATURE

CONTROL PROBE or FONDUE IN LIQUIDS.

3. Wipe down the cooking surface with a damp cloth and dry thoroughly. DO NOT

use steel wool or other metal pads as this may scratch the surface.

4. The fondue is NOT dishwasher safe. You may wash it with hot soapy water,

rinse and dry thoroughly.

CAUTION: TEMPERATURE CONTROL PROBE must always be completely dry

before use.

STORAGE AND MAINTENANCE

• Unplug cord and remove temperature controller. Allow appliance to cool before

storing. Store your Electric Fondue Pot in a dry location, such as on a tabletop or

countertop, or on a cupboard shelf. Wind the electrical cord into a coil and secure

with a twist fastener. For convenience, the temperature controller and cord can

then be stored inside the fondue pot. Other than recommended cleaning, no

further user maintenance is necessary.

ADDITIONAL MAGNETIC CORD WARNINGS

• Do not attempt to defeat the detachable magnetic cord system by trying to

permanently attach cord set to product.

• Do not stick pins or other sharp objects in holes on magnetic cord set.

• Do not use any type of steel wool to clean magnetic contacts.