Technical Support and E-Warranty Certificate www.vevor.com/support DROP-IN ICE CHESTS INSTRUCTIONS MODEL:FG-SKU1 / FG-SKU2 / FG-SKU3 / FG-SKU4 FG-SKU5 / FG-SKU6 / FG-SKU7 / FG-SKU8 FG-SKU9 / FG-SKU10 / FG-SKU11 / FG-SKU12 FG-SKU13 We continue to be committed to provide you tools with competitive price.
DROP IN ICE CHEST Three types of lid, the picture is for reference only, please refer to the actual. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
SAFETY INSTRUCTIONS WARNING! Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property. WARNING! This product contains small parts. If swallowed, it will pose a choking hazard. Keep these small parts away from children when assembling! WARNING! 1.
adhesive strip to prevent heat loss and ensure your ice stays cool for a long time. 2.The ice bucket with lid is a versatile and essential accessory to the bar. It can keep wines, beers, cocktails and juices fresh and pleasant after long-term use. It is a great choice for terraces, backyards, poolside and restaurants, perfect for any casual occasion such as dinner, sports party or barbecue. 3.
Installation steps: 1: Place No. 4 part in the basin hole, and install No. 5/6/7 part on No. 4 part. 2: Tighten the screw with the key, and tighten the 8/9 part on the 7 part. 3: Place part No. 1/2/3 in part No. 4 to complete the installation.
Dimensions and specifications Model FG-SKU1 FG-SKU2 FG-SKU3 FG-SKU4 FG-SKU5 FG-SKU6 FG-SKU7 FG-SKU8 FG-SKU9 FG-SKU10 FG-SKU11 FG-SKU12 FG-SKU13 Cut-out size (L*W*H mm) 345*295*660 495*400*540 595*495*590 695*390*640 695*493*640 333*283*690 485*335*535 535*410*530 515*410*690 435*283*590 587*435*570 895*435*580 665*435*760 NOTE: Product capacity (L) 28.52 44.24 78.37 82.6 107.8 25.3 30.25 43.5 77.9 26.7 55.23 95.66 109.48 Holding time Can provide 24H insulation effect. 1.
-6-
-7-
-8-
-9-
- 10 -
- 11 -
✱The picture is for reference only, please refer to the actual object. CLEANING AND MAINTENANCE 1.In order to prevent the growth of bacteria, please take care of the melted water after each use of the ice tank. 2.If it is not used for a long time, please empty the water inside the ice tank and keep it dry to avoid odor or bacteria. 3.When using the ice tank for a long time, please pay attention to putting ice or replacing ice and water in time.
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai EC REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germany UK REP:Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd.
- 14 -
Technical Support and E-Warranty Certificate www.vevor.
Technique Assistance et certificat de garantie électronique www.vevor.com/support DROP - DANS LE COFFRE À GLACE S INSTRUCTIONS MODÈLE : FG-SKU1/FG-SKU2/FG-SKU3/FG-SKU4 FG-SKU 5 / FG-SKU6 / FG-SKU7 / FG-SKU8 FG-SKU 9 / FG-SKU10 / FG-SKU11 / FG-SKU12 FG-SKU1 3 We continue to be committed to provide you tools with competitive price.
- 17 -
DROP IN ICE CHEST Trois types de couvercles, l'image est pour référence seulement, veuillez vous référer au réel. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
CONSIGNES DE SÉCURITÉ AVERTISSEMENT! Lisez et comprenez l'intégralité de ce manuel avant d'assembler, d'installer, d'utiliser ou d'entretenir ce produit. Le non-respect de ces avertissements et instructions peut entraîner des blessures corporelles ou des dommages à des biens de valeur. AVERTISSEMENT! Ce produit contient de petites pièces. En cas d'ingestion, il présente un risque d'étouffement. Gardez ces petites pièces hors de portée des enfants lors du montage ! AVERTISSEMENT! 5.
1. Conçu en acier inoxydable brossé, ce seau à glace intégré est durable. Conception à double couche pour obtenir un meilleur effet d'isolation. L'intérieur est isolé avec du polyuréthane haute densité et le couvercle est scellé avec une bande adhésive pour éviter les pertes de chaleur et garantir que votre glace reste fraîche pendant longtemps. 2. Le seau à glace avec couvercle est un accessoire polyvalent et indispensable au bar.
-4-
Étapes d'installation : 1 : Placez la pièce n° 4 dans le trou du bassin et installez la pièce n° 5/6/7 sur la pièce n° 4. 2 : Serrez la vis avec la clé, et serrez la partie 8/9 sur la partie 7. 3 : Placez la pièce n°1/2/3 dans la pièce n°4 pour terminer l'installation.
Dimensions et spécifications Modèle FG-SKU1 FG-SKU 2 FG-SKU 3 FG-SKU 4 FG-SKU 5 FG-SKU 6 FG-SKU 7 FG-SKU 8 FG-SKU 9 FG-SKU1 0 FG-SKU1 1 FG-SKU1 2 FG-SKU1 3 Taille de découpe (L*L*H mm ) 345*295*660 495*400*540 595*495*590 695*390*640 695*493*640 333*283*690 485*335*535 535*410*530 515*410*690 435*283*590 587*435*570 895*435*580 665*435*760 REMARQUE : Capacité du produit (L) 28.52 44.24 78.37 82,6 107,8 25.3 30h25 43,5 77,9 26,7 55.23 95.66 109.48 Temps de maintien Peut fournir un effet d'isolation 24H.
-7-
-8-
-9-
- 10 -
- 11 -
- 12 -
- 13 -
✱ L'image est uniquement à titre de référence, veuillez vous référer à l'objet réel. CLEANING AND MAINTENANCE 1. Afin d'éviter la croissance de bactéries, veuillez prendre soin de l'eau fondue après chaque utilisation du réservoir de glace. 2. S'il n'est pas utilisé pendant une longue période, veuillez vider l'eau à l'intérieur du réservoir de glace et la garder au sec pour éviter les odeurs ou les bactéries. 3.
veillez à mettre de la glace ou à remplacer la glace et l'eau à temps. Adresse : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai REPRÉSENTANT CE : SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Allemagne REPRÉSENTANT DU Royaume-Uni : Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston, Royaume-Uni Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETASTWOOD NSW 2122 Australie Importé aux États-Unis : Sanven Technology Ltd.
- 16 -
Technique Assistance et certificat de garantie électronique www.vevor.
Technisch Support- und E-Garantie-Zertifikat www.vevor.com/support DROP - IN ICE CHEST S ANWEISUNGEN MODELL : FG-SKU1 / FG-SKU2 / FG-SKU3 / FG-SKU4 FG-SKU 5 / FG-SKU6 / FG-SKU7 / FG-SKU8 FG-SKU 9 / FG-SKU10 / FG-SKU11 / FG-SKU12 FG-SKU1 3 We continue to be committed to provide you tools with competitive price.
- 19 -
DROP IN ICE CHEST Drei Arten von Deckeln, das Bild dient nur als Referenz, bitte beachten Sie zum Tatsächlichen. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
SICHERHEITSHINWEISE WARNUNG! Lesen und verstehen Sie dieses gesamte Handbuch, bevor Sie dieses Produkt zusammenbauen, installieren, bedienen oder warten. Die Nichtbeachtung dieser Warnungen und Anweisungen kann zu Verletzungen oder Sachschäden führen. WARNUNG! Dieses Produkt enthält Kleinteile. Bei Verschlucken besteht Erstickungsgefahr. Halten Sie diese Kleinteile beim Zusammenbau von Kindern fern! WARNUNG! 9.
Doppelschichtiges Design zur Erzielung einer besseren Isolationswirkung. Der Innenraum ist mit hochdichtem Polyurethan isoliert und der Deckel ist mit einem Klebestreifen versiegelt, um Wärmeverluste zu verhindern und sicherzustellen, dass Ihr Eis lange kühl bleibt. 2. Der Eiskübel mit Deckel ist ein vielseitiges und unverzichtbares Accessoire für die Bar. Es kann Weine, Biere, Cocktails und Säfte nach längerem Gebrauch frisch und angenehm halten.
-4-
Installationsschritte: 1: Platzieren Sie Teil Nr. 4 im Beckenloch und installieren Sie Teil Nr. 5/6/7 auf Teil Nr. 4. 2: Ziehen Sie die Schraube mit dem Schlüssel fest und ziehen Sie den 8/9-Teil am 7-Teil fest. 3: Platzieren Sie Teil Nr. 1/2/3 in Teil Nr. 4, um die Installation abzuschließen.
Abmessungen und Spezifikationen Modell FG-SKU 1 FG-SKU 2 FG-SKU 3 FG-SKU 4 FG-SKU 5 FG-SKU 6 FG-SKU 7 FG-SKU 8 FG-SKU 9 FG-SKU 10 FG-SKU 11 FG-SKU 12 FG-SKU 13 Ausschnittgrö ße _ (L*B*H mm ) Produktkapazi tät (L) 345*295*660 28.52 495*400*540 44.24 595*495*590 78,37 695*390*640 82,6 695*493*640 107,8 333*283*690 25.3 485*335*535 30.25 535*410*530 43,5 515*410*690 77,9 435*283*590 26.7 587*435*570 55.
HINWEIS : 1. „ Ausschnittgröße “ ist die empfohlene Größe. Einzelheiten finden Sie in der tatsächlichen Installationsumgebung. 2. „ Ausschnittmaß “ Das Höhenmaß in den Abmessungen ist die für den Einbau reservierte Höhe . 3. Die Produktkapazitätsdaten in der Tabelle werden anhand der Dichte des Wassers berechnet, und in der Praxis kann es zu einigen Fehlern kommen, was ein normales Phänomen ist. 4.
-8-
-9-
- 10 -
- 11 -
- 12 -
- 13 -
✱ Das Bild dient nur als Referenz, bitte beziehen Sie sich auf das tatsächliche Objekt. CLEANING AND MAINTENANCE 1. Um das Wachstum von Bakterien zu verhindern, achten Sie bitte nach jedem Gebrauch des Eistanks auf das geschmolzene Wasser. 2. Wenn das Gerät längere Zeit nicht verwendet wird, entleeren Sie bitte das Wasser im Eisbehälter und halten Sie ihn trocken, um Gerüche oder Bakterien zu vermeiden. 3.
Sie bitte darauf, rechtzeitig Eis einzufüllen oder Eis und Wasser auszutauschen. Adresse: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai EK-VERTRETER: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Deutschland UK REP: Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston, Vereinigtes Königreich Importiert nach AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien In die USA importiert: Sanven Technology Ltd.
- 16 -
Technisch Support- und E-Garantiezertifikat www.vevor.
Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support DROP - IN GHIACCIAIA S _ ISTRUZIONI MODELLO : FG-SKU1 / FG-SKU2 / FG-SKU3 / FG-SKU4 FG-SKU 5 / FG-SKU6 / FG-SKU7 / FG-SKU8 FG-SKU9 / FG-SKU10 / FG-SKU11 / FG-SKU12 FG-SKU1 3 We continue to be committed to provide you tools with competitive price.
- 19 -
DROP IN ICE CHEST Tre tipi di coperchio, l'immagine è solo di riferimento, fare riferimento all'effettivo. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
ISTRUZIONI DI SICUREZZA AVVERTIMENTO! Leggere e comprendere l'intero manuale prima di assemblare, installare, utilizzare o sottoporre a manutenzione questo prodotto. La mancata osservanza di queste avvertenze e istruzioni può causare lesioni personali o danni a beni di valore. AVVERTIMENTO! Questo prodotto contiene piccole parti. Se ingerito, rappresenterà un pericolo di soffocamento. Tenere queste piccole parti lontano dalla portata dei bambini durante il montaggio! AVVERTIMENTO! 13.
ghiaccio integrato è durevole. Design a doppio strato per ottenere un migliore effetto isolante. L'interno è isolato con poliuretano ad alta densità e il coperchio è sigillato con una striscia adesiva per evitare perdite di calore e garantire che il ghiaccio rimanga fresco a lungo. 2. Il secchiello per il ghiaccio con coperchio è un accessorio versatile ed essenziale per il bar. Può mantenere vini, birre, cocktail e succhi freschi e piacevoli dopo un uso a lungo termine.
-4-
Passaggi di installazione: 1: Posizionare la parte n. 4 nel foro del lavabo e installare la parte n. 5/6/7 sulla parte n. 4. 2: Stringere la vite con la chiave e serrare la parte 8/9 sulla parte 7. 3: Posizionare la parte n. 1/2/3 nella parte n. 4 per completare l'installazione.
Dimensioni e specifiche Modello FG-SKU1 FG-SKU 2 FG-SKU 3 FG-SKU 4 FG-SKU 5 FG-SKU 6 FG-SKU 7 FG-SKU 8 FG-SKU 9 FG-SKU1 0 FG-SKU1 1 FG-SKU1 2 FG-SKU1 3 del ritaglio (L*L*A mm ) 345*295*660 495*400*540 595*495*590 695*390*640 695*493*640 333*283*690 485*335*535 535*410*530 515*410*690 435*283*590 587*435*570 895*435*580 665*435*760 NOTA : Capacità del prodotto (L) 28.52 44.24 78.37 82.6 107,8 25.3 30.25 43,5 77,9 26.7 55.23 95,66 109,48 Tempo di attesa Può fornire un effetto isolante 24 ore su 24. 1.
secchiello del ghiaccio.
-8-
-9-
- 10 -
- 11 -
- 12 -
- 13 -
✱ L'immagine è solo di riferimento, fare riferimento all'oggetto reale. CLEANING AND MAINTENANCE 1. Per prevenire la crescita di batteri, fare attenzione all'acqua sciolta dopo ogni utilizzo del serbatoio del ghiaccio. 2. Se non viene utilizzato per un lungo periodo, svuotare l'acqua all'interno del serbatoio del ghiaccio e mantenerlo asciutto per evitare odori o batteri. 3.
Indirizzo: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai RAPPRESENTANTE CE: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Germania REP UK: Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston, Regno Unito Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Importato negli Stati Uniti: Sanven Technology Ltd.
- 16 -
Tecnico Supporto e certificato di garanzia elettronica www.vevor.
Técnico Soporte y certificado de garantía electrónica www.vevor.com/support CAÍDA - EN EL PECHO DE HIELO S INSTRUCCIONES MODELO : FG-SKU1 / FG-SKU2 / FG-SKU3 / FG-SKU4 FG-SKU 5 / FG-SKU6 / FG-SKU7 / FG-SKU8 FG-SKU 9 / FG-SKU10 / FG-SKU11 / FG-SKU12 FG-SKU1 3 We continue to be committed to provide you tools with competitive price.
- 19 -
DROP IN ICE CHEST Tres tipos de tapa, la imagen es solo para referencia, consulte a lo real. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
¡ADVERTENCIA! Lea y comprenda este manual completo antes de ensamblar, instalar, operar o dar servicio a este producto. El incumplimiento de estas advertencias e instrucciones puede provocar lesiones personales o daños a bienes valiosos. ¡ADVERTENCIA! Este producto contiene piezas pequeñas. Si se ingiere, representará un peligro de asfixia. ¡Mantenga estas piezas pequeñas fuera del alcance de los niños durante el montaje! ¡ADVERTENCIA! 17.
tapa está sellada con una tira adhesiva para evitar la pérdida de calor y garantizar que el hielo se mantenga fresco durante mucho tiempo. 2. La cubitera de hielo con tapa es un accesorio versátil e imprescindible para la barra. Puede mantener vinos, cervezas, cócteles y jugos frescos y agradables después de un uso prolongado. Es una excelente opción para terrazas, patios traseros, piscinas y restaurantes, perfecta para cualquier ocasión informal como una cena, una fiesta deportiva o una barbacoa. 3.
Pasos de instalación: 1: Coloque la pieza No. 4 en el orificio del lavabo e instale la pieza No. 5/6/7 en la pieza No. 4. 2: Apriete el tornillo con la llave y apriete la parte 8/9 en la parte 7. 3: Coloque la pieza No. 1/2/3 en la pieza No. 4 para completar la instalación.
Dimensiones y especificaciones Modelo FG-SKU1 FG-SKU 2 FG-SKU 3 FG-SKU 4 FG-SKU 5 FG-SKU 6 FG-SKU 7 FG-SKU 8 FG-SKU 9 FG-SKU1 0 FG-SKU1 1 FG-SKU1 2 FG-SKU1 3 Tamaño de corte (Largo*An*Al mm ) 345*295*660 495*400*540 595*495*590 695*390*640 695*493*640 333*283*690 485*335*535 535*410*530 515*410*690 435*283*590 587*435*570 895*435*580 665*435*760 NOTA : Capacidad del producto (L) 28,52 44.24 78,37 82,6 107,8 25.3 30.25 43,5 77,9 26,7 55.
con agua, se necesitan 23 kg de agua para llenar la cubeta de hielo.
-7-
-8-
-9-
- 10 -
- 11 -
- 12 -
✱ La imagen es solo de referencia, consulte el objeto real. CLEANING AND MAINTENANCE 1. Para evitar el crecimiento de bacterias, cuide el agua derretida después de cada uso del tanque de hielo. 2. Si no se utiliza durante mucho tiempo, vacíe el agua dentro del tanque de hielo y manténgalo seco para evitar olores o bacterias. 3. Cuando utilice el tanque de hielo durante mucho tiempo, preste atención a poner hielo o reemplazar el hielo y el agua a tiempo.
Dirección: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai REPRESENTANTE CE: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Alemania REPRESENTANTE DEL REINO UNIDO: Pooledas Group Ltd. Unidad 5 Albert Edward House, The Pavilions Preston, Reino Unido Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREET ASTWOOD NSW 2122 Australia Importado a EE. UU.: Sanven Technology Ltd.
- 15 -
Técnico Certificado de soporte y garantía electrónica www.vevor.
Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.com/support DROP - IN ICE CHEST S INSTRUKCJE MODEL : FG-SKU1 / FG-SKU2 / FG-SKU3 / FG-SKU4 FG-SKU 5 / FG-SKU6 / FG-SKU7 / FG-SKU8 FG-SKU 9 / FG-SKU10 / FG-SKU11 / FG-SKU12 FG-SKU1 3 We continue to be committed to provide you tools with competitive price.
- 18 -
DROP IN ICE CHEST Trzy rodzaje pokryw, zdjęcie ma charakter wyłącznie poglądowy, proszę zapoznać się do rzeczywistego. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
INSTRUKCJE BEZPIECZEŃSTWA OSTRZEŻENIE! Przeczytaj i zrozum całą niniejszą instrukcję przed montażem, instalacją, obsługą lub serwisowaniem tego produktu. Niezastosowanie się do tych ostrzeżeń i instrukcji może spowodować obrażenia ciała lub uszkodzenie cennego mienia. OSTRZEŻENIE! Ten produkt zawiera małe części. W przypadku połknięcia istnieje ryzyko zadławienia. Podczas montażu trzymaj te małe części z dala od dzieci! OSTRZEŻENIE! 21.
wiaderko na lód jest trwałe. Dwuwarstwowa konstrukcja zapewniająca lepszy efekt izolacji. Wnętrze jest izolowane poliuretanem o dużej gęstości, a pokrywa jest uszczelniona paskiem samoprzylepnym, aby zapobiec utracie ciepła i zapewnić, że lód pozostanie chłodny przez długi czas. 2. Pojemnik na lód z pokrywką to uniwersalny i niezbędny dodatek do baru. Może zachować świeżość i przyjemność win, piw, koktajli i soków po długotrwałym użytkowaniu.
-4-
Kroki instalacji: 1: Umieść część nr 4 w otworze umywalki i zamontuj część nr 5/6/7 na części nr 4. 2: Dokręć śrubę kluczem i dokręć część 8/9 do części 7. 3: Umieść część nr 1/2/3 w części nr 4, aby zakończyć instalację.
Wymiary i specyfikacje Model FG-SKU1 FG-SKU 2 FG-SKU 3 FG-SKU 4 FG-SKU 5 FG-SKU 6 FG-SKU 7 FG-SKU 8 FG-SKU 9 FG-SKU1 0 FG-SKU1 1 FG-SKU1 2 FG-SKU1 3 Rozmiar odcięty (dł.*szer.*wys. mm ) 345*295*660 495*400*540 595*495*590 695*390*640 695*493*640 333*283*690 485*335*535 535*410*530 515*410*690 435*283*590 587*435*570 895*435*580 665*435*760 UWAGA : Pojemność produktu (L) Czas trzymania 28.52 44,24 78,37 82,6 107,8 25.3 30.25 43,5 77,9 26,7 55.23 95,66 109,48 Może zapewnić efekt izolacji 24H. 1.
-7-
-8-
-9-
- 10 -
- 11 -
- 12 -
- 13 -
✱ Zdjęcie ma wyłącznie charakter poglądowy. Proszę zapoznać się z rzeczywistym obiektem. CLEANING AND MAINTENANCE 1. Aby zapobiec rozwojowi bakterii, należy dbać o roztopioną wodę po każdym użyciu zbiornika na lód. 2. Jeśli nie będzie używany przez dłuższy czas, należy opróżnić zbiornik z lodu i pozostawić go w stanie suchym, aby uniknąć nieprzyjemnego zapachu i bakterii. 3.
zwrócić uwagę na włożenie lodu lub wymianę lodu i wody na czas. Adres: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Szanghaj Przedstawiciel WE: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Niemcy REPUBLIKA WIELKIEJ BRYTANII: Pooledas Group Ltd. Jednostka 5 Albert Edward House, The Pavilions Preston, Wielka Brytania Import do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Import do USA: Sanven Technology Ltd.
- 16 -
Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.
Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support DROP - IN ICE CHEST S INSTRUCTIES MODEL : FG-SKU1 / FG-SKU2 / FG-SKU3 / FG-SKU4 FG-SKU 5 / FG-SKU6 / FG-SKU7 / FG-SKU8 FG-SKU 9 / FG-SKU10 / FG-SKU11 / FG-SKU12 FG-SKU1 3 We continue to be committed to provide you tools with competitive price.
- 19 -
DROP IN ICE CHEST Drie soorten deksels, de afbeelding is alleen ter referentie, raadpleeg naar het werkelijke. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual.
VEILIGHEIDSINSTRUCTIES WAARSCHUWING! Lees en begrijp deze gehele handleiding voordat u dit product monteert, installeert, bedient of onderhoudt. Het niet opvolgen van deze waarschuwingen en instructies kan persoonlijk letsel of schade aan waardevolle eigendommen veroorzaken. WAARSCHUWING! Dit product bevat kleine onderdelen. Bij inslikken kan er sprake zijn van verstikkingsgevaar. Houd deze kleine onderdelen tijdens de montage uit de buurt van kinderen! WAARSCHUWING! 25.
is duurzaam. Dubbellaags ontwerp voor een beter isolatie-effect. De binnenkant is geïsoleerd met polyurethaan met hoge dichtheid en het deksel is afgedicht met een plakstrip om warmteverlies te voorkomen en ervoor te zorgen dat uw ijs lang koel blijft. 2. De ijsemmer met deksel is een veelzijdig en essentieel accessoire voor de bar. Het kan wijnen, bieren, cocktails en sappen na langdurig gebruik vers en aangenaam houden.
-4-
Installatiestappen: 1: Plaats onderdeel nr. 4 in het bassingat en installeer onderdeel nr. 5/6/7 op onderdeel nr. 4. 2: Draai de schroef vast met de sleutel en draai het 8/9 deel op het 7 deel. 3: Plaats onderdeel nr. 1/2/3 in onderdeel nr. 4 om de installatie te voltooien.
Afmetingen en specificaties Model FG-SKU1 FG-SKU 2 FG-SKU 3 FG-SKU 4 FG-SKU 5 FG-SKU 6 FG-SKU 7 FG-SKU 8 FG-SKU 9 FG-SKU1 0 FG-SKU1 1 FG-SKU1 2 FG-SKU1 3 Uitgesneden maat (L*B*H mm ) 345*295*660 495*400*540 595*495*590 695*390*640 695*493*640 333*283*690 485*335*535 535*410*530 515*410*690 435*283*590 587*435*570 895*435*580 665*435*760 OPMERKING : Productcapaciteit (L) Tijd vasthouden 28.52 44.24 78.37 82,6 107,8 25.3 30.25 43,5 77,9 26.7 55.23 95,66 109.48 Kan 24 uur isolatie-effect bieden. 1.
water nodig om de ijsemmer te vullen.
-8-
-9-
- 10 -
- 11 -
- 12 -
- 13 -
✱ De afbeelding dient alleen ter referentie, raadpleeg het werkelijke object. CLEANING AND MAINTENANCE 1. Om de groei van bacteriën te voorkomen, zorg je na elk gebruik van de ijstank voor het gesmolten water. 2. Als het langere tijd niet wordt gebruikt, leeg dan het water in de ijstank en houd het droog om geurtjes of bacteriën te voorkomen. 3. Als u de ijstank langdurig gebruikt, let er dan op dat u op tijd ijs plaatst of ijs en water vervangt.
Adres: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai EG-REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Duitsland VK REP: Pooledas Group Ltd. Unit 5 Albert Edward House, The Pavilions Preston, Verenigd Koninkrijk Geïmporteerd naar AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australië Geïmporteerd naar de VS: Sanven Technology Ltd.
- 16 -
Technisch Ondersteuning en e-garantiecertificaat www.vevor.
Teknisk Support och e-garanticertifikat www.vevor.com/support DROP - IN I CE CHEST S INSTRUKTIONER MODELL : FG-SKU1 / FG-SKU2 / FG-SKU3 / FG-SKU4 FG-SKU 5 / FG-SKU6 / FG-SKU7 / FG-SKU8 FG-SKU 9 / FG-SKU10 / FG-SKU11 / FG-SKU12 FG-SKU1 3 We continue to be committed to provide you tools with competitive price.
- 19 -
DROP IN ICE CHEST Tre typer av lock, bilden är endast för referens, se till det faktiska. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received.
VARNING! Läs och förstå hela denna manual innan du monterar, installerar, använder eller servar denna produkt. Underlåtenhet att följa dessa varningar och instruktioner kan orsaka personskada eller skada på värdefull egendom. VARNING! Denna produkt innehåller små delar. Om den sväljs kommer den att utgöra en kvävningsrisk. Håll dessa små delar borta från barn när du monterar dem! VARNING! 29.
håller sig sval under lång tid. 2. Ishinken med lock är ett mångsidigt och viktigt tillbehör till baren. Det kan hålla viner, öl, cocktails och juicer fräscha och behagliga efter långvarig användning. Det är ett utmärkt val för terrasser, bakgårdar, vid poolen och restauranger, perfekt för alla tillfälliga tillfällen som middag, sportfest eller grillfest. 3.
Installationssteg: 1: Placera nr 4 del i bassänghålet och installera nr 5/6/7 del på nr 4 del. 2: Dra åt skruven med nyckeln och dra åt 8/9-delen på 7-delen. 3: Placera del nr. 1/2/3 i del nr. 4 för att slutföra installationen.
Modell FG-SKU1 FG-SKU 2 FG-SKU 3 FG-SKU 4 FG-SKU 5 FG-SKU 6 FG-SKU 7 FG-SKU 8 FG-SKU 9 FG-SKU1 0 FG-SKU1 1 FG-SKU1 2 FG-SKU1 3 Utskuren storlek (L*B*H mm ) 345*295*660 495*400*540 595*495*590 695*390*640 695*493*640 333*283*690 485*335*535 535*410*530 515*410*690 435*283*590 587*435*570 895*435*580 665*435*760 Produktkapacitet Hålltid (L) 28,52 44,24 78,37 82,6 107,8 25.3 Kan ge 24H 30.25 isoleringseffekt. 43,5 77,9 26.7 55,23 95,66 109,48 OBS : 1. " Utskuren storlek " är den rekommenderade storleken.
-6-
-7-
-8-
-9-
- 10 -
- 11 -
✱ Bilden är endast för referens, se det faktiska objektet. CLEANING AND MAINTENANCE 1. För att förhindra tillväxt av bakterier, ta hand om det smälta vattnet efter varje användning av istanken. 2. Om den inte används under en längre tid, töm vattnet inuti istanken och håll det torrt för att undvika lukt eller bakterier. 3. När du använder istanken under lång tid, var uppmärksam på att lägga is eller byta ut is och vatten i tid.
Adress: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai EC REP: SHUNSHUN GmbH. Römeräcker 9 Z2021,76351 Linkenheim-Hochstetten, Tyskland UK REP: Pooledas Group Ltd. Enhet 5 Albert Edward House, The Pavilions Preston, Storbritannien Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien Importerad till USA: Sanven Technology Ltd.
Teknisk Support och e-garanticertifikat www.vevor.