1. Power: when connected to the power supply, there is a sound of dripping, and all display units shine at the same time for a successful self-test. 2. Power button: Press Key drop a sound into standby, power indicator light, four furnace area display -. (When there is no operation in the standby state for a short period of time, the furnace area - and the power indicator is no longer displayed, and automatically exits the standby state and returns to the shutdown state.
5. Child lock: long press the child lock key for 2-3 seconds to drop a sound to lock or unlock, locked successfully child lock indicator light on, shutdown or standby with heating state can operate child lock. After successfully locking, do not operate any health except child lock. Locked successfully as shown in figure: 8. Panel high temperature warning: there is still residual temperature on the furnace panel after use, warning display H, be careful of scalding hands. 9.
SAFETY PRECAUTIONS This product does not consider the following: Warning: If the surface is cracked, turn off the appliance to avoid possible electric shock. Use of equipment by unattended young children and disabled children's play equipment. 01. Do not overheat an empty pan. 02. Do not carry the induction cooker with the appliance loaded. 03. Do not let children operate alone to avoid scalding and other risks. 04.
7 8
HEAT DISSIPATION STRUCTURE INSTALLATION DRAWING When the machine is embedded, to ensure the normal use of the machine and better heat dissipation. Requirements: 1. 30-50mm heat dissipation should be left on the left and right sides and behind. 2. The counter interior should be as large as possible to ensure that enough cold air is sucked into the machine. 15 3. Inlet air (cold air) must be separated from outlet air (hot air) space. 4. The air inlet and outlet space of the counter leave air roar.
POWER SUPPLY INSTALLATION DRAWING Electrical diagram of the beautiful line (black, white, green E) Electrical diagram of the beautiful line (black, white, green E) This figure is only for three-phase power in the United States, and the voltage This chart is only applicable to 220 V single-phase power countries in between two live lines is 240VAC Europe and China Three core cable machine connection drawing Three core cable machine connection drawing The leakage switch The leakage switch 240V 50A 2
