Installation Guide

9

The distance between the underside of the appliance and the
separator panel must respect the dimensions given in the
figure (mini. 50mm).
 In order to ensure the correct operation of the product, do not obstruct
the
minimum required
clearance (min. 20 mm) on the worktop for
air flow out.
 If an undertop oven is installed, make sure the oven is equipped with a
cooling system.

Do not install the hob above a dishwasher or washing-machine, so that
the electronic circuits do not come into contact with steam or moisture
which could damage them.
ELECTRICAL CONNECTION
 Disconnect the appliance from the power supply.

Installation must be carried out by qualified personnel
who know the current safety and installation regulations.
 The manufacturer declines all liability for injury to persons or animals
and for damage to property resulting from failure to observe the
regulations provided in this chapter.

The power cable must be long enough to remove the hob from the
worktop.

Make sure the voltage specified on the rating label located on the
bottom of the appliance is the same as that of the home.