Technical Support and E-Warranty Certificate www.vevor.com/support ELECTRIC WAX MELTER DT-S005(A), DT-S005(B), DT-S005(C) USER MANUAL We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
Electric Wax Melter NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
INTRODUCTION Electric wax melter are manufactured in durable stainless steel and dull polished to give a long lasting finish. With proper care and management your new purchase will give you years of trouble free service . IMPORTANT SAFETY RULES 1. Read all instructions carefully. Responsibility for failure cannotbe accepted if any of these instructions are ignored. 2. Always unplug the melter plug before cleaning, after use, and after emptying. 3.
before itcools . 18. Switch OFF after use and unplug the unit from the socket. 19. Do not use the Wax melter outdoor. INDOOR USE ONLY 20. Do not overfill the Wax melter with wax, doing so can lead tospillage as the wax heats up and expands. 21. Improper use of the Wax melrer may result in severe scalding. 22. Beware of hot steam when removing the lid. 23. Always ensure the lid is securely fitted whenever the wax meltercontains wax. 24.
PRIOR TO FIRST USE: Remove all packaging from the inside and outside of the wax melter HOW TO USE 1. 2. 3. 4. 5. 6. Always use the wax melter on a flat level surface. Turn the lid anti clockwise to open. Fill the wax melter not above the Max level indicator. Replace the lid and turn clockwise to lock into place. Connect the plug to the socket. Switch ON. The Red "Heating" pilot lamp will light up and the waxstarts to heat up. 7. The wax will reach the set thermostat temperature. 8.
preventa boil-dry accident. 13. The melter can be very heavy when filled with wax. Melter should not be carried or moved when full of wax as the weight and unsteady load can cause injury or strain. Melter should be placed in their position of use and filled through several trips with a smaller,manageable container (eg a jug). To ensure operator safety in lifting the machines, Melter should never be moved when filled with more than 5L (5L =5Kg approximately).
transport, if soreset the thermal cut-off following the above instructions. THERMAL CUT-OUT The appliance is fitted with a thermal cut-out to have double safety protection .When the wax is boiled dry and the boil dry protections fails to work ,the thermal cut-out will work ,then the appliance stops working. The cut out temperature is 240℃ This thermal cut-out is a disposable part. When this part comes into effect, it will be broken and cannot be used again.
items Description 1 Name ELECTRIC WAX MELTER 2 Model DT-S005(A) DT-S005(B) 3 Rating (s) 220-240V~ 50Hz/1200W/ 5.0~5.5L 120V~ 60Hz/ 1200W 220-240V~ / 50Hz/1200W/ 5.0~5.5L 5.0~5.5L 4 Package Size 270×270×250mm 270×270×250mm 270×270×250mm 5 G.W： 3.2kg 3.2kg 3.2kg 6 Correct Disposal: DT-S005(C) This product is subject to the provision of European Directive2012/19/EC.
PRECAUTIONS A. Thermostat installation instructions. B.The lid must be placed when the wax is dissolved. C.Do not mix with water when melting wax. Wipe the water off before adding wax beans. Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd.
Technical Support and E-Warranty Certificate www.vevor.
