Use and Care Manual

2
INTRODUCTION
Electric wax melter are manufactured in durable stainless steel and
dull polished to give a long lasting finish. With proper care and
management your new purchase will give you years of trouble free
service .
IMPORTANT SAFETY RULES
1. Read all instructions carefully.
Responsibility for failure cannotbe accepted if any of these
instructions are ignored.
2. Always unplug the melter plug before cleaning, after use,
and after emptying.
3. Before using the Wax melter, check whether the voltage
indicatedcorresponds with the electric outlet (EU Plug
230V/US Plug 120V).
4. Make sure the unit is connected to an earthed socket.
5. Do not use the Wax melter if the cord or plug is damaged, it
shouldbe replaced before using.
6. Always switch off before removing plug from the outlet.
7. Always switch off before trying to move the wax melter.
8. Remove the plug by grasping the plug. Do NOT pull the cord.
9. Do not let cord hang over edge of counter.
Place the wax melter securely in center of counter or work
space. Never place on a tilted surface.
10.Do not place the wax melter on or near hot surfaces.
11.Do not switch on the Wax melter, if the wax tank is empty.
12.Do not place the wax melter near gas stove, electric
burner orheated oven.
13.Put the Wax melter on flat stable surface; keep it away
from theedge of counter to avoid accident.
14.Close supervision is necessary when any appliance is used
by ornear children.
15.Do not allow cord to touch hot surface of the Wax melter.
16.To protect against electric shock, DO NOT IMMERSE IN
WATER for the Wax melter.
17.Unplug the unit from the socket, and pour out all the wax